[PATCH 5.4 75/96] mtd: onenand_base: Adjust indentation in onenand_read_ops_nolock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Nathan Chancellor <natechancellor@xxxxxxxxx>

commit 0e7ca83e82d021c928dadf4c13c137d57337540d upstream.

Clang warns:

../drivers/mtd/nand/onenand/onenand_base.c:1269:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
        while (!ret) {
        ^
../drivers/mtd/nand/onenand/onenand_base.c:1266:2: note: previous
statement is here
        if (column + thislen > writesize)
        ^
1 warning generated.

This warning occurs because there is a space before the tab of the while
loop. There are spaces at the beginning of a lot of the lines in this
block, remove them so that the indentation is consistent with the Linux
kernel coding style and clang no longer warns.

Fixes: a8de85d55700 ("[MTD] OneNAND: Implement read-while-load")
Link: https://github.com/ClangBuiltLinux/linux/issues/794
Signed-off-by: Nathan Chancellor <natechancellor@xxxxxxxxx>
Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/mtd/nand/onenand/onenand_base.c |   82 ++++++++++++++++----------------
 1 file changed, 41 insertions(+), 41 deletions(-)

--- a/drivers/mtd/nand/onenand/onenand_base.c
+++ b/drivers/mtd/nand/onenand/onenand_base.c
@@ -1248,44 +1248,44 @@ static int onenand_read_ops_nolock(struc
 
 	stats = mtd->ecc_stats;
 
- 	/* Read-while-load method */
+	/* Read-while-load method */
 
- 	/* Do first load to bufferRAM */
- 	if (read < len) {
- 		if (!onenand_check_bufferram(mtd, from)) {
+	/* Do first load to bufferRAM */
+	if (read < len) {
+		if (!onenand_check_bufferram(mtd, from)) {
 			this->command(mtd, ONENAND_CMD_READ, from, writesize);
- 			ret = this->wait(mtd, FL_READING);
- 			onenand_update_bufferram(mtd, from, !ret);
+			ret = this->wait(mtd, FL_READING);
+			onenand_update_bufferram(mtd, from, !ret);
 			if (mtd_is_eccerr(ret))
 				ret = 0;
- 		}
- 	}
+		}
+	}
 
 	thislen = min_t(int, writesize, len - read);
 	column = from & (writesize - 1);
 	if (column + thislen > writesize)
 		thislen = writesize - column;
 
- 	while (!ret) {
- 		/* If there is more to load then start next load */
- 		from += thislen;
- 		if (read + thislen < len) {
+	while (!ret) {
+		/* If there is more to load then start next load */
+		from += thislen;
+		if (read + thislen < len) {
 			this->command(mtd, ONENAND_CMD_READ, from, writesize);
- 			/*
- 			 * Chip boundary handling in DDP
- 			 * Now we issued chip 1 read and pointed chip 1
+			/*
+			 * Chip boundary handling in DDP
+			 * Now we issued chip 1 read and pointed chip 1
 			 * bufferram so we have to point chip 0 bufferram.
- 			 */
- 			if (ONENAND_IS_DDP(this) &&
- 			    unlikely(from == (this->chipsize >> 1))) {
- 				this->write_word(ONENAND_DDP_CHIP0, this->base + ONENAND_REG_START_ADDRESS2);
- 				boundary = 1;
- 			} else
- 				boundary = 0;
- 			ONENAND_SET_PREV_BUFFERRAM(this);
- 		}
- 		/* While load is going, read from last bufferRAM */
- 		this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, thislen);
+			 */
+			if (ONENAND_IS_DDP(this) &&
+			    unlikely(from == (this->chipsize >> 1))) {
+				this->write_word(ONENAND_DDP_CHIP0, this->base + ONENAND_REG_START_ADDRESS2);
+				boundary = 1;
+			} else
+				boundary = 0;
+			ONENAND_SET_PREV_BUFFERRAM(this);
+		}
+		/* While load is going, read from last bufferRAM */
+		this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, thislen);
 
 		/* Read oob area if needed */
 		if (oobbuf) {
@@ -1301,24 +1301,24 @@ static int onenand_read_ops_nolock(struc
 			oobcolumn = 0;
 		}
 
- 		/* See if we are done */
- 		read += thislen;
- 		if (read == len)
- 			break;
- 		/* Set up for next read from bufferRAM */
- 		if (unlikely(boundary))
- 			this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2);
- 		ONENAND_SET_NEXT_BUFFERRAM(this);
- 		buf += thislen;
+		/* See if we are done */
+		read += thislen;
+		if (read == len)
+			break;
+		/* Set up for next read from bufferRAM */
+		if (unlikely(boundary))
+			this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2);
+		ONENAND_SET_NEXT_BUFFERRAM(this);
+		buf += thislen;
 		thislen = min_t(int, writesize, len - read);
- 		column = 0;
- 		cond_resched();
- 		/* Now wait for load */
- 		ret = this->wait(mtd, FL_READING);
- 		onenand_update_bufferram(mtd, from, !ret);
+		column = 0;
+		cond_resched();
+		/* Now wait for load */
+		ret = this->wait(mtd, FL_READING);
+		onenand_update_bufferram(mtd, from, !ret);
 		if (mtd_is_eccerr(ret))
 			ret = 0;
- 	}
+	}
 
 	/*
 	 * Return success, if no ECC failures, else -EBADMSG





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux