This is a note to let you know that I've just added the patch titled
USB: misc: iowarrior: add support for the 28 and 28L devices
to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.
If you have any questions about this process, please let me know.
>From 5f6f8da2d7b5a431d3f391d0d73ace8edfb42af7 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Date: Tue, 11 Feb 2020 20:04:22 -0800
Subject: USB: misc: iowarrior: add support for the 28 and 28L devices
Add new device ids for the 28 and 28L devices. These have 4 interfaces
instead of 2, but the driver binds the same, so the driver changes are
minimal.
Cc: Christoph Jung <jung@xxxxxxxxxxxxx>
Cc: stable <stable@xxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20200212040422.2991-2-gregkh@xxxxxxxxxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/misc/iowarrior.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index 990acbe14852..d20b60acfe8a 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -33,6 +33,9 @@
#define USB_DEVICE_ID_CODEMERCS_IOWPV2 0x1512
/* full speed iowarrior */
#define USB_DEVICE_ID_CODEMERCS_IOW56 0x1503
+/* fuller speed iowarrior */
+#define USB_DEVICE_ID_CODEMERCS_IOW28 0x1504
+#define USB_DEVICE_ID_CODEMERCS_IOW28L 0x1505
/* OEMed devices */
#define USB_DEVICE_ID_CODEMERCS_IOW24SAG 0x158a
@@ -139,6 +142,8 @@ static const struct usb_device_id iowarrior_ids[] = {
{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW56)},
{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW24SAG)},
{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW56AM)},
+ {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW28)},
+ {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW28L)},
{} /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, iowarrior_ids);
@@ -379,6 +384,8 @@ static ssize_t iowarrior_write(struct file *file,
break;
case USB_DEVICE_ID_CODEMERCS_IOW56:
case USB_DEVICE_ID_CODEMERCS_IOW56AM:
+ case USB_DEVICE_ID_CODEMERCS_IOW28:
+ case USB_DEVICE_ID_CODEMERCS_IOW28L:
/* The IOW56 uses asynchronous IO and more urbs */
if (atomic_read(&dev->write_busy) == MAX_WRITES_IN_FLIGHT) {
/* Wait until we are below the limit for submitted urbs */
@@ -777,7 +784,9 @@ static int iowarrior_probe(struct usb_interface *interface,
}
if ((dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56) ||
- (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56AM)) {
+ (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56AM) ||
+ (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW28) ||
+ (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW28L)) {
res = usb_find_last_int_out_endpoint(iface_desc,
&dev->int_out_endpoint);
if (res) {
@@ -791,7 +800,9 @@ static int iowarrior_probe(struct usb_interface *interface,
dev->report_size = usb_endpoint_maxp(dev->int_in_endpoint);
if ((dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) &&
((dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56) ||
- (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56AM)))
+ (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56AM) ||
+ (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW28) ||
+ (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW28L)))
/* IOWarrior56 has wMaxPacketSize different from report size */
dev->report_size = 7;
--
2.25.0
