Re: [PATCH v3 1/2] remoteproc: qcom_q6v5_mss: Don't reassign mpss region on shutdown

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 10 Feb 2020 at 18:16, Bjorn Andersson
<bjorn.andersson@xxxxxxxxxx> wrote:
>
> On Mon 10 Feb 15:05 PST 2020, Mathieu Poirier wrote:
>
> > Hi Bjorn,
> >
> > On Mon, Feb 03, 2020 at 10:26:40PM -0800, Bjorn Andersson wrote:
> > > Trying to reclaim mpss memory while the mba is not running causes the
> > > system to crash on devices with security fuses blown, so leave it
> > > assigned to the remote on shutdown and recover it on a subsequent boot.
> > >
> > > Fixes: 6c5a9dc2481b ("remoteproc: qcom: Make secure world call for mem ownership switch")
> > > Cc: stable@xxxxxxxxxxxxxxx
> > > Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> > > ---
> > >
> > > Changes since v2:
> > > - The assignment of mpss memory back to Linux is rejected in the coredump case
> > >   on production devices, so check the return value of q6v5_xfer_mem_ownership()
> > >   before attempting to memcpy() the data.
> > >
> > >  drivers/remoteproc/qcom_q6v5_mss.c | 23 +++++++++++++----------
> > >  1 file changed, 13 insertions(+), 10 deletions(-)
> > >
> > > diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
> > > index 471128a2e723..25c03a26bf88 100644
> > > --- a/drivers/remoteproc/qcom_q6v5_mss.c
> > > +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> > > @@ -887,11 +887,6 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc)
> > >             writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
> > >     }
> > >
> > > -   ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm,
> > > -                                 false, qproc->mpss_phys,
> > > -                                 qproc->mpss_size);
> > > -   WARN_ON(ret);
> > > -
> > >     q6v5_reset_assert(qproc);
> > >
> > >     q6v5_clk_disable(qproc->dev, qproc->reset_clks,
> > > @@ -981,6 +976,10 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
> > >                     max_addr = ALIGN(phdr->p_paddr + phdr->p_memsz, SZ_4K);
> > >     }
> > >
> > > +   /* Try to reset ownership back to Linux */
> > > +   q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, false,
> > > +                           qproc->mpss_phys, qproc->mpss_size);
> >
> > Would you mind adding more chatter here, something like what is mentioned in the
> > changelog?  That way I anyone trying to review this code doesn't have to suffer
> > through the same mental gymnastic.
> >
>
> Sure thing, as this patch shows this dynamic wasn't clear - and this
> patch is based on my observations. With it we no longer crash the entire
> system by hitting a security violation during a crash, but there's still
> some details that I'm uncertain about.
>
> > > +
> > >     mpss_reloc = relocate ? min_addr : qproc->mpss_phys;
> > >     qproc->mpss_reloc = mpss_reloc;
> > >     /* Load firmware segments */
> > > @@ -1070,8 +1069,16 @@ static void qcom_q6v5_dump_segment(struct rproc *rproc,
> > >     void *ptr = rproc_da_to_va(rproc, segment->da, segment->size);
> > >
> > >     /* Unlock mba before copying segments */
> > > -   if (!qproc->dump_mba_loaded)
> > > +   if (!qproc->dump_mba_loaded) {
> > >             ret = q6v5_mba_load(qproc);
> > > +           if (!ret) {
> > > +                   /* Try to reset ownership back to Linux */
> > > +                   ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm,
> > > +                                                 false,
> > > +                                                 qproc->mpss_phys,
> > > +                                                 qproc->mpss_size);
> > > +           }
> >
> > I'm a bit puzzled here as to why a different reclaim strategy is needed.  It is
> > clear to me that if q6v5_mba_load() returns 0 then the MBA is running and we can
> > safely reclaim ownership of the memory.  But is it absolutely needed when we
> > know that 1) the MCU has crashed and 2) said memory will be reclaimed in
> > q6v5_mpss_load()?
> >
>
> The ownership transfer here is a jump into secure world, which somehow
> together with the firmware running on the modem processor will update
> the access permissions for the mpss memory region.
>
> As we enter this function the recovery handling in the core has just
> stopped the remote processor, so we know it's off. As such we must first
> boot the remote processor again, in order to reclaim the access to the
> mpss memory region.
>
> New in this revision is the fact that this operation might actually be
> rejected (e.g. on end-user hardware).
>
> So we need to guard the memcpy below on either of these cases, as unless
> we've successfully booted the modem processor and gotten permission to
> read the mpss memory this operation will trigger a security violation
> and the device will reboot.
>
> > If so I think an explanation in the code is needed.
> >
>
> Makes sense, I will formulate above explanation into a comment. As well
> as review the other callers of q6v5_xfer_mem_ownership().
>
> > I also assume there is no way to know if the mba is running, hence not taking
> > any chance.  If that's the case it would be nice to add that to the comment in
> > q6v5_mpss_load().
> >
>
> We know that we enter q6v5_mpss_load() with the modem processor just
> booted, but the memory assignment is there to handle the case where the
> mpss memory region for some reason was left in the hands on the modem.
> I will have to do some more digging to figure out if this is a valid
> scenario or not.

I'm really happy that you're also not sure about this patch... I spent
hours (no joke) trying to figure out the workflow and logic of using
q6v5_xfer_mem_ownership() and even then I'm ambivalent...  Carefully
understanding and documenting the scenarios we trying to handle will
go a long way in terms of future stability of the system.

>
> Thanks for your review Mathieu!
>
> Regards,
> Bjorn
>
> > Thanks,
> > Mathieu
> >
> > > +   }
> > >
> > >     if (!ptr || ret)
> > >             memset(dest, 0xff, segment->size);
> > > @@ -1123,10 +1130,6 @@ static int q6v5_start(struct rproc *rproc)
> > >     return 0;
> > >
> > >  reclaim_mpss:
> > > -   xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm,
> > > -                                           false, qproc->mpss_phys,
> > > -                                           qproc->mpss_size);
> > > -   WARN_ON(xfermemop_ret);
> > >     q6v5_mba_reclaim(qproc);
> > >
> > >     return ret;
> > > --
> > > 2.23.0
> > >



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux