From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
[ Upstream commit 44efc78d0e464ce70b45b165c005f8bedc17952e ]
In order to fix XDP support if sw buffer management is used as fallback
for hw bm devices, define MVNETA_SKB_HEADROOM as maximum between
XDP_PACKET_HEADROOM and NET_SKB_PAD and let the hw aligns the IP header
to 4-byte boundary.
Fix rx_offset_correction initialization if mvneta_bm_port_init fails in
mvneta_resume routine
Fixes: 0db51da7a8e9 ("net: mvneta: add basic XDP support")
Tested-by: Sven Auhagen <sven.auhagen@xxxxxxxxxxxx>
Signed-off-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/ethernet/marvell/mvneta.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -324,8 +324,7 @@
ETH_HLEN + ETH_FCS_LEN, \
cache_line_size())
-#define MVNETA_SKB_HEADROOM (max(XDP_PACKET_HEADROOM, NET_SKB_PAD) + \
- NET_IP_ALIGN)
+#define MVNETA_SKB_HEADROOM max(XDP_PACKET_HEADROOM, NET_SKB_PAD)
#define MVNETA_SKB_PAD (SKB_DATA_ALIGN(sizeof(struct skb_shared_info) + \
MVNETA_SKB_HEADROOM))
#define MVNETA_SKB_SIZE(len) (SKB_DATA_ALIGN(len) + MVNETA_SKB_PAD)
@@ -1167,6 +1166,7 @@ bm_mtu_err:
mvneta_bm_pool_destroy(pp->bm_priv, pp->pool_short, 1 << pp->id);
pp->bm_priv = NULL;
+ pp->rx_offset_correction = MVNETA_SKB_HEADROOM;
mvreg_write(pp, MVNETA_ACC_MODE, MVNETA_ACC_MODE_EXT1);
netdev_info(pp->dev, "fail to update MTU, fall back to software BM\n");
}
@@ -4948,7 +4948,6 @@ static int mvneta_probe(struct platform_
SET_NETDEV_DEV(dev, &pdev->dev);
pp->id = global_port_id++;
- pp->rx_offset_correction = MVNETA_SKB_HEADROOM;
/* Obtain access to BM resources if enabled and already initialized */
bm_node = of_parse_phandle(dn, "buffer-manager", 0);
@@ -4973,6 +4972,10 @@ static int mvneta_probe(struct platform_
}
of_node_put(bm_node);
+ /* sw buffer management */
+ if (!pp->bm_priv)
+ pp->rx_offset_correction = MVNETA_SKB_HEADROOM;
+
err = mvneta_init(&pdev->dev, pp);
if (err < 0)
goto err_netdev;
@@ -5130,6 +5133,7 @@ static int mvneta_resume(struct device *
err = mvneta_bm_port_init(pdev, pp);
if (err < 0) {
dev_info(&pdev->dev, "use SW buffer management\n");
+ pp->rx_offset_correction = MVNETA_SKB_HEADROOM;
pp->bm_priv = NULL;
}
}
