Patch "ath9k_htc: Do not support PowerSave by default" has been added to the 3.12-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    ath9k_htc: Do not support PowerSave by default

to the 3.12-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     ath9k_htc-do-not-support-powersave-by-default.patch
and it can be found in the queue-3.12 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.


>From 6bca610d97b6139a1d7598b8009da9d339daa50f Mon Sep 17 00:00:00 2001
From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
Date: Thu, 30 Jan 2014 09:14:53 +0100
Subject: ath9k_htc: Do not support PowerSave by default

From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>

commit 6bca610d97b6139a1d7598b8009da9d339daa50f upstream.

It is a copy/paste of patch provided by Sujith for ath9k.

"Even though we make sure PowerSave is not enabled by default
by disabling the flag, WIPHY_FLAG_PS_ON_BY_DEFAULT on init,
PS could be enabled by userspace based on various factors
like battery usage etc. Since PS in ath9k is just broken
and has been untested for years, remove support for it, but
allow a user to explicitly enable it using a module parameter."

Signed-off-by: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
Signed-off-by: John W. Linville <linville@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/net/wireless/ath/ath9k/htc_drv_init.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -34,6 +34,10 @@ static int ath9k_htc_btcoex_enable;
 module_param_named(btcoex_enable, ath9k_htc_btcoex_enable, int, 0444);
 MODULE_PARM_DESC(btcoex_enable, "Enable wifi-BT coexistence");
 
+static int ath9k_ps_enable;
+module_param_named(ps_enable, ath9k_ps_enable, int, 0444);
+MODULE_PARM_DESC(ps_enable, "Enable WLAN PowerSave");
+
 #define CHAN2G(_freq, _idx)  { \
 	.center_freq = (_freq), \
 	.hw_value = (_idx), \
@@ -725,12 +729,14 @@ static void ath9k_set_hw_capab(struct at
 		IEEE80211_HW_SPECTRUM_MGMT |
 		IEEE80211_HW_HAS_RATE_CONTROL |
 		IEEE80211_HW_RX_INCLUDES_FCS |
-		IEEE80211_HW_SUPPORTS_PS |
 		IEEE80211_HW_PS_NULLFUNC_STACK |
 		IEEE80211_HW_REPORTS_TX_ACK_STATUS |
 		IEEE80211_HW_MFP_CAPABLE |
 		IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
 
+	if (ath9k_ps_enable)
+		hw->flags |= IEEE80211_HW_SUPPORTS_PS;
+
 	hw->wiphy->interface_modes =
 		BIT(NL80211_IFTYPE_STATION) |
 		BIT(NL80211_IFTYPE_ADHOC) |


Patches currently in stable-queue which might be from linux@xxxxxxxxxxxxxxxx are

queue-3.12/ar5523-fix-usb-id-for-gigaset.patch
queue-3.12/ath9k_htc-do-not-support-powersave-by-default.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]