From: Voon Weifeng <weifeng.voon@xxxxxxxxx> [ Upstream commit 909c1dde67c433f1e4122f2619cbd8ac370fcf0a ] The recent patch to support passive mode converter did not take care the phy interface configuration in PCI platform data. Hence, converting all the PCI platform data from plat->interface to plat->phy_interface as the default mode is meant for PHY. Fixes: 0060c8783330 ("net: stmmac: implement support for passive mode converters via dt") Signed-off-by: Voon Weifeng <weifeng.voon@xxxxxxxxx> Tested-by: Tan, Tee Min <tee.min.tan@xxxxxxxxx> Signed-off-by: Ong Boon Leong <boon.leong.ong@xxxxxxxxx> Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c @@ -96,7 +96,7 @@ static int stmmac_default_data(struct pc plat->bus_id = 1; plat->phy_addr = 0; - plat->interface = PHY_INTERFACE_MODE_GMII; + plat->phy_interface = PHY_INTERFACE_MODE_GMII; plat->dma_cfg->pbl = 32; plat->dma_cfg->pblx8 = true; @@ -220,7 +220,8 @@ static int ehl_sgmii_data(struct pci_dev { plat->bus_id = 1; plat->phy_addr = 0; - plat->interface = PHY_INTERFACE_MODE_SGMII; + plat->phy_interface = PHY_INTERFACE_MODE_SGMII; + return ehl_common_data(pdev, plat); } @@ -233,7 +234,8 @@ static int ehl_rgmii_data(struct pci_dev { plat->bus_id = 1; plat->phy_addr = 0; - plat->interface = PHY_INTERFACE_MODE_RGMII; + plat->phy_interface = PHY_INTERFACE_MODE_RGMII; + return ehl_common_data(pdev, plat); } @@ -261,7 +263,7 @@ static int tgl_sgmii_data(struct pci_dev { plat->bus_id = 1; plat->phy_addr = 0; - plat->interface = PHY_INTERFACE_MODE_SGMII; + plat->phy_interface = PHY_INTERFACE_MODE_SGMII; return tgl_common_data(pdev, plat); } @@ -361,7 +363,7 @@ static int quark_default_data(struct pci plat->bus_id = pci_dev_id(pdev); plat->phy_addr = ret; - plat->interface = PHY_INTERFACE_MODE_RMII; + plat->phy_interface = PHY_INTERFACE_MODE_RMII; plat->dma_cfg->pbl = 16; plat->dma_cfg->pblx8 = true; @@ -418,7 +420,7 @@ static int snps_gmac5_default_data(struc plat->bus_id = 1; plat->phy_addr = -1; - plat->interface = PHY_INTERFACE_MODE_GMII; + plat->phy_interface = PHY_INTERFACE_MODE_GMII; plat->dma_cfg->pbl = 32; plat->dma_cfg->pblx8 = true;