3.16.82-rc1 review patch. If anyone has any objections, please let me know. ------------------ From: Stephan Gerhold <stephan@xxxxxxxxxxx> commit 99c4f70df3a6446c56ca817c2d0f9c12d85d4e7c upstream. The USB regulator was removed for AB8500 in commit 41a06aa738ad ("regulator: ab8500: Remove USB regulator"). It was then added for AB8505 in commit 547f384f33db ("regulator: ab8500: add support for ab8505"). However, there was never an entry added for it in ab8505_regulator_match. This causes all regulators after it to be initialized with the wrong device tree data, eventually leading to an out-of-bounds array read. Given that it is not used anywhere in the kernel, it seems likely that similar arguments against supporting it exist for AB8505 (it is controlled by hardware). Therefore, simply remove it like for AB8500 instead of adding an entry in ab8505_regulator_match. Fixes: 547f384f33db ("regulator: ab8500: add support for ab8505") Cc: Linus Walleij <linus.walleij@xxxxxxxxxx> Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx> Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx> Link: https://lore.kernel.org/r/20191106173125.14496-1-stephan@xxxxxxxxxxx Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx> --- drivers/regulator/ab8500.c | 17 ----------------- include/linux/regulator/ab8500.h | 1 - 2 files changed, 18 deletions(-) --- a/drivers/regulator/ab8500.c +++ b/drivers/regulator/ab8500.c @@ -1099,23 +1099,6 @@ static struct ab8500_regulator_info .update_val_idle = 0x82, .update_val_normal = 0x02, }, - [AB8505_LDO_USB] = { - .desc = { - .name = "LDO-USB", - .ops = &ab8500_regulator_mode_ops, - .type = REGULATOR_VOLTAGE, - .id = AB8505_LDO_USB, - .owner = THIS_MODULE, - .n_voltages = 1, - .volt_table = fixed_3300000_voltage, - }, - .update_bank = 0x03, - .update_reg = 0x82, - .update_mask = 0x03, - .update_val = 0x01, - .update_val_idle = 0x03, - .update_val_normal = 0x01, - }, [AB8505_LDO_AUDIO] = { .desc = { .name = "LDO-AUDIO", --- a/include/linux/regulator/ab8500.h +++ b/include/linux/regulator/ab8500.h @@ -38,7 +38,6 @@ enum ab8505_regulator_id { AB8505_LDO_AUX6, AB8505_LDO_INTCORE, AB8505_LDO_ADC, - AB8505_LDO_USB, AB8505_LDO_AUDIO, AB8505_LDO_ANAMIC1, AB8505_LDO_ANAMIC2,