3.16.82-rc1 review patch. If anyone has any objections, please let me know. ------------------ From: Arnd Bergmann <arnd@xxxxxxxx> commit 37dc78d9b17c971479f742d6d08f38d8f2beb688 upstream. Most of the board-mop500-regulators.c file is never referenced and can simply be removed. Cc: Mark Brown <broonie@xxxxxxxxxx> Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> [bwh: Backported to 3.16 as dependency of commit 99c4f70df3a6 "regulator: ab8500: Remove AB8505 USB regulator"] Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx> --- arch/arm/mach-ux500/board-mop500-regulators.c | 600 ------------------ arch/arm/mach-ux500/board-mop500-regulators.h | 8 - 2 files changed, 608 deletions(-) --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -13,46 +13,6 @@ #include <linux/regulator/machine.h> #include <linux/regulator/ab8500.h> #include "board-mop500-regulators.h" -#include "id.h" - -static struct regulator_consumer_supply gpio_en_3v3_consumers[] = { - REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), -}; - -struct regulator_init_data gpio_en_3v3_regulator = { - .constraints = { - .name = "EN-3V3", - .min_uV = 3300000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(gpio_en_3v3_consumers), - .consumer_supplies = gpio_en_3v3_consumers, -}; - -/* - * TPS61052 regulator - */ -static struct regulator_consumer_supply tps61052_vaudio_consumers[] = { - /* - * Boost converter supply to raise voltage on audio speaker, this - * is actually connected to three pins, VInVhfL (left amplifier) - * VInVhfR (right amplifier) and VIntDClassInt - all three must - * be connected to the same voltage. - */ - REGULATOR_SUPPLY("vintdclassint", "ab8500-codec.0"), -}; - -struct regulator_init_data tps61052_regulator = { - .constraints = { - .name = "vaudio-hf", - .min_uV = 4500000, - .max_uV = 4500000, - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(tps61052_vaudio_consumers), - .consumer_supplies = tps61052_vaudio_consumers, -}; static struct regulator_consumer_supply ab8500_vaux1_consumers[] = { /* Main display, u8500 R3 uib */ @@ -107,27 +67,6 @@ static struct regulator_consumer_supply REGULATOR_SUPPLY("vmmc", "sdi0"), }; -static struct regulator_consumer_supply ab8505_vaux4_consumers[] = { -}; - -static struct regulator_consumer_supply ab8505_vaux5_consumers[] = { -}; - -static struct regulator_consumer_supply ab8505_vaux6_consumers[] = { -}; - -static struct regulator_consumer_supply ab8505_vaux8_consumers[] = { - /* AB8500 audio codec device */ - REGULATOR_SUPPLY("v-aux8", NULL), -}; - -static struct regulator_consumer_supply ab8505_vadc_consumers[] = { - /* Internal general-purpose ADC */ - REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"), - /* ADC for charger */ - REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"), -}; - static struct regulator_consumer_supply ab8500_vtvout_consumers[] = { /* TV-out DENC supply */ REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"), @@ -168,11 +107,6 @@ static struct regulator_consumer_supply REGULATOR_SUPPLY("v-intcore", "abx500-clk.0"), }; -static struct regulator_consumer_supply ab8505_usb_consumers[] = { - /* HS USB OTG physical interface */ - REGULATOR_SUPPLY("v-ape", NULL), -}; - static struct regulator_consumer_supply ab8500_vana_consumers[] = { /* DB8500 DSI */ REGULATOR_SUPPLY("vdddsi1v2", "mcde"), @@ -483,11 +417,6 @@ static struct regulator_consumer_supply REGULATOR_SUPPLY("vinvsim", "sim-detect.0"), }; -/* extended configuration for VextSupply2, only used for HREFP_V20 boards */ -static struct ab8500_ext_regulator_cfg ab8500_ext_supply2 = { - .hwreq = true, -}; - /* * AB8500 external regulators */ @@ -526,456 +455,6 @@ static struct regulator_init_data ab8500 }, }; -/* ab8505 regulator register initialization */ -static struct ab8500_regulator_reg_init ab8505_reg_init[] = { - /* - * VarmRequestCtrl - * VsmpsCRequestCtrl - * VsmpsARequestCtrl - * VsmpsBRequestCtrl - */ - INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL1, 0x00, 0x00), - /* - * VsafeRequestCtrl - * VpllRequestCtrl - * VanaRequestCtrl = HP/LP depending on VxRequest - */ - INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL2, 0x30, 0x00), - /* - * Vaux1RequestCtrl = HP/LP depending on VxRequest - * Vaux2RequestCtrl = HP/LP depending on VxRequest - */ - INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL3, 0xf0, 0x00), - /* - * Vaux3RequestCtrl = HP/LP depending on VxRequest - * SwHPReq = Control through SWValid disabled - */ - INIT_REGULATOR_REGISTER(AB8505_REGUREQUESTCTRL4, 0x07, 0x00), - /* - * VsmpsASysClkReq1HPValid - * VsmpsBSysClkReq1HPValid - * VsafeSysClkReq1HPValid - * VanaSysClkReq1HPValid = disabled - * VpllSysClkReq1HPValid - * Vaux1SysClkReq1HPValid = disabled - * Vaux2SysClkReq1HPValid = disabled - * Vaux3SysClkReq1HPValid = disabled - */ - INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00), - /* - * VsmpsCSysClkReq1HPValid - * VarmSysClkReq1HPValid - * VbbSysClkReq1HPValid - * VsmpsMSysClkReq1HPValid - */ - INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQ1HPVALID2, 0x00, 0x00), - /* - * VsmpsAHwHPReq1Valid - * VsmpsBHwHPReq1Valid - * VsafeHwHPReq1Valid - * VanaHwHPReq1Valid = disabled - * VpllHwHPReq1Valid - * Vaux1HwHPreq1Valid = disabled - * Vaux2HwHPReq1Valid = disabled - * Vaux3HwHPReqValid = disabled - */ - INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ1VALID1, 0xe8, 0x00), - /* - * VsmpsMHwHPReq1Valid - */ - INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ1VALID2, 0x00, 0x00), - /* - * VsmpsAHwHPReq2Valid - * VsmpsBHwHPReq2Valid - * VsafeHwHPReq2Valid - * VanaHwHPReq2Valid = disabled - * VpllHwHPReq2Valid - * Vaux1HwHPReq2Valid = disabled - * Vaux2HwHPReq2Valid = disabled - * Vaux3HwHPReq2Valid = disabled - */ - INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ2VALID1, 0xe8, 0x00), - /* - * VsmpsMHwHPReq2Valid - */ - INIT_REGULATOR_REGISTER(AB8505_REGUHWHPREQ2VALID2, 0x00, 0x00), - /** - * VsmpsCSwHPReqValid - * VarmSwHPReqValid - * VsmpsASwHPReqValid - * VsmpsBSwHPReqValid - * VsafeSwHPReqValid - * VanaSwHPReqValid - * VanaSwHPReqValid = disabled - * VpllSwHPReqValid - * Vaux1SwHPReqValid = disabled - */ - INIT_REGULATOR_REGISTER(AB8505_REGUSWHPREQVALID1, 0xa0, 0x00), - /* - * Vaux2SwHPReqValid = disabled - * Vaux3SwHPReqValid = disabled - * VsmpsMSwHPReqValid - */ - INIT_REGULATOR_REGISTER(AB8505_REGUSWHPREQVALID2, 0x03, 0x00), - /* - * SysClkReq2Valid1 = SysClkReq2 controlled - * SysClkReq3Valid1 = disabled - * SysClkReq4Valid1 = SysClkReq4 controlled - */ - INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQVALID1, 0x0e, 0x0a), - /* - * SysClkReq2Valid2 = disabled - * SysClkReq3Valid2 = disabled - * SysClkReq4Valid2 = disabled - */ - INIT_REGULATOR_REGISTER(AB8505_REGUSYSCLKREQVALID2, 0x0e, 0x00), - /* - * Vaux4SwHPReqValid - * Vaux4HwHPReq2Valid - * Vaux4HwHPReq1Valid - * Vaux4SysClkReq1HPValid - */ - INIT_REGULATOR_REGISTER(AB8505_REGUVAUX4REQVALID, 0x00, 0x00), - /* - * VadcEna = disabled - * VintCore12Ena = disabled - * VintCore12Sel = 1.25 V - * VintCore12LP = inactive (HP) - * VadcLP = inactive (HP) - */ - INIT_REGULATOR_REGISTER(AB8505_REGUMISC1, 0xfe, 0x10), - /* - * VaudioEna = disabled - * Vaux8Ena = disabled - * Vamic1Ena = disabled - * Vamic2Ena = disabled - */ - INIT_REGULATOR_REGISTER(AB8505_VAUDIOSUPPLY, 0x1e, 0x00), - /* - * Vamic1_dzout = high-Z when Vamic1 is disabled - * Vamic2_dzout = high-Z when Vamic2 is disabled - */ - INIT_REGULATOR_REGISTER(AB8505_REGUCTRL1VAMIC, 0x03, 0x00), - /* - * VsmpsARegu - * VsmpsASelCtrl - * VsmpsAAutoMode - * VsmpsAPWMMode - */ - INIT_REGULATOR_REGISTER(AB8505_VSMPSAREGU, 0x00, 0x00), - /* - * VsmpsBRegu - * VsmpsBSelCtrl - * VsmpsBAutoMode - * VsmpsBPWMMode - */ - INIT_REGULATOR_REGISTER(AB8505_VSMPSBREGU, 0x00, 0x00), - /* - * VsafeRegu - * VsafeSelCtrl - * VsafeAutoMode - * VsafePWMMode - */ - INIT_REGULATOR_REGISTER(AB8505_VSAFEREGU, 0x00, 0x00), - /* - * VPll = Hw controlled (NOTE! PRCMU bits) - * VanaRegu = force off - */ - INIT_REGULATOR_REGISTER(AB8505_VPLLVANAREGU, 0x0f, 0x02), - /* - * VextSupply1Regu = force OFF (OTP_ExtSupply12LPnPolarity 1) - * VextSupply2Regu = force OFF (OTP_ExtSupply12LPnPolarity 1) - * VextSupply3Regu = force OFF (OTP_ExtSupply3LPnPolarity 0) - * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0 - * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0 - */ - INIT_REGULATOR_REGISTER(AB8505_EXTSUPPLYREGU, 0xff, 0x30), - /* - * Vaux1Regu = force HP - * Vaux2Regu = force off - */ - INIT_REGULATOR_REGISTER(AB8505_VAUX12REGU, 0x0f, 0x01), - /* - * Vaux3Regu = force off - */ - INIT_REGULATOR_REGISTER(AB8505_VRF1VAUX3REGU, 0x03, 0x00), - /* - * VsmpsASel1 - */ - INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL1, 0x00, 0x00), - /* - * VsmpsASel2 - */ - INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL2, 0x00, 0x00), - /* - * VsmpsASel3 - */ - INIT_REGULATOR_REGISTER(AB8505_VSMPSASEL3, 0x00, 0x00), - /* - * VsmpsBSel1 - */ - INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL1, 0x00, 0x00), - /* - * VsmpsBSel2 - */ - INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL2, 0x00, 0x00), - /* - * VsmpsBSel3 - */ - INIT_REGULATOR_REGISTER(AB8505_VSMPSBSEL3, 0x00, 0x00), - /* - * VsafeSel1 - */ - INIT_REGULATOR_REGISTER(AB8505_VSAFESEL1, 0x00, 0x00), - /* - * VsafeSel2 - */ - INIT_REGULATOR_REGISTER(AB8505_VSAFESEL2, 0x00, 0x00), - /* - * VsafeSel3 - */ - INIT_REGULATOR_REGISTER(AB8505_VSAFESEL3, 0x00, 0x00), - /* - * Vaux1Sel = 2.8 V - */ - INIT_REGULATOR_REGISTER(AB8505_VAUX1SEL, 0x0f, 0x0C), - /* - * Vaux2Sel = 2.9 V - */ - INIT_REGULATOR_REGISTER(AB8505_VAUX2SEL, 0x0f, 0x0d), - /* - * Vaux3Sel = 2.91 V - */ - INIT_REGULATOR_REGISTER(AB8505_VRF1VAUX3SEL, 0x07, 0x07), - /* - * Vaux4RequestCtrl - */ - INIT_REGULATOR_REGISTER(AB8505_VAUX4REQCTRL, 0x00, 0x00), - /* - * Vaux4Regu - */ - INIT_REGULATOR_REGISTER(AB8505_VAUX4REGU, 0x00, 0x00), - /* - * Vaux4Sel - */ - INIT_REGULATOR_REGISTER(AB8505_VAUX4SEL, 0x00, 0x00), - /* - * Vaux1Disch = short discharge time - * Vaux2Disch = short discharge time - * Vaux3Disch = short discharge time - * Vintcore12Disch = short discharge time - * VTVoutDisch = short discharge time - * VaudioDisch = short discharge time - */ - INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH, 0xfc, 0x00), - /* - * VanaDisch = short discharge time - * Vaux8PullDownEna = pulldown disabled when Vaux8 is disabled - * Vaux8Disch = short discharge time - */ - INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH2, 0x16, 0x00), - /* - * Vaux4Disch = short discharge time - */ - INIT_REGULATOR_REGISTER(AB8505_REGUCTRLDISCH3, 0x01, 0x00), - /* - * Vaux5Sel - * Vaux5LP - * Vaux5Ena - * Vaux5Disch - * Vaux5DisSfst - * Vaux5DisPulld - */ - INIT_REGULATOR_REGISTER(AB8505_CTRLVAUX5, 0x00, 0x00), - /* - * Vaux6Sel - * Vaux6LP - * Vaux6Ena - * Vaux6DisPulld - */ - INIT_REGULATOR_REGISTER(AB8505_CTRLVAUX6, 0x00, 0x00), -}; - -struct regulator_init_data ab8505_regulators[AB8505_NUM_REGULATORS] = { - /* supplies to the display/camera */ - [AB8505_LDO_AUX1] = { - .constraints = { - .name = "V-DISPLAY", - .min_uV = 2800000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - .boot_on = 1, /* display is on at boot */ - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers), - .consumer_supplies = ab8500_vaux1_consumers, - }, - /* supplies to the on-board eMMC */ - [AB8505_LDO_AUX2] = { - .constraints = { - .name = "V-eMMC1", - .min_uV = 1100000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers), - .consumer_supplies = ab8500_vaux2_consumers, - }, - /* supply for VAUX3, supplies to SDcard slots */ - [AB8505_LDO_AUX3] = { - .constraints = { - .name = "V-MMC-SD", - .min_uV = 1100000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers), - .consumer_supplies = ab8500_vaux3_consumers, - }, - /* supply for VAUX4, supplies to NFC and standalone secure element */ - [AB8505_LDO_AUX4] = { - .constraints = { - .name = "V-NFC-SE", - .min_uV = 1100000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux4_consumers), - .consumer_supplies = ab8505_vaux4_consumers, - }, - /* supply for VAUX5, supplies to TBD */ - [AB8505_LDO_AUX5] = { - .constraints = { - .name = "V-AUX5", - .min_uV = 1050000, - .max_uV = 2790000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux5_consumers), - .consumer_supplies = ab8505_vaux5_consumers, - }, - /* supply for VAUX6, supplies to TBD */ - [AB8505_LDO_AUX6] = { - .constraints = { - .name = "V-AUX6", - .min_uV = 1050000, - .max_uV = 2790000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux6_consumers), - .consumer_supplies = ab8505_vaux6_consumers, - }, - /* supply for gpadc, ADC LDO */ - [AB8505_LDO_ADC] = { - .constraints = { - .name = "V-ADC", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8505_vadc_consumers), - .consumer_supplies = ab8505_vadc_consumers, - }, - /* supply for ab8500-vaudio, VAUDIO LDO */ - [AB8505_LDO_AUDIO] = { - .constraints = { - .name = "V-AUD", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers), - .consumer_supplies = ab8500_vaud_consumers, - }, - /* supply for v-anamic1 VAMic1-LDO */ - [AB8505_LDO_ANAMIC1] = { - .constraints = { - .name = "V-AMIC1", - .valid_ops_mask = REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers), - .consumer_supplies = ab8500_vamic1_consumers, - }, - /* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */ - [AB8505_LDO_ANAMIC2] = { - .constraints = { - .name = "V-AMIC2", - .valid_ops_mask = REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers), - .consumer_supplies = ab8500_vamic2_consumers, - }, - /* supply for v-aux8, VAUX8 LDO */ - [AB8505_LDO_AUX8] = { - .constraints = { - .name = "V-AUX8", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8505_vaux8_consumers), - .consumer_supplies = ab8505_vaux8_consumers, - }, - /* supply for v-intcore12, VINTCORE12 LDO */ - [AB8505_LDO_INTCORE] = { - .constraints = { - .name = "V-INTCORE", - .min_uV = 1250000, - .max_uV = 1350000, - .input_uV = 1800000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE | - REGULATOR_CHANGE_DRMS, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers), - .consumer_supplies = ab8500_vintcore_consumers, - }, - /* supply for LDO USB */ - [AB8505_LDO_USB] = { - .constraints = { - .name = "V-USB", - .valid_ops_mask = REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8505_usb_consumers), - .consumer_supplies = ab8505_usb_consumers, - }, - /* supply for U8500 CSI-DSI, VANA LDO */ - [AB8505_LDO_ANA] = { - .constraints = { - .name = "V-CSI-DSI", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers), - .consumer_supplies = ab8500_vana_consumers, - }, -}; - struct ab8500_regulator_platform_data ab8500_regulator_plat_data = { .reg_init = ab8500_reg_init, .num_reg_init = ARRAY_SIZE(ab8500_reg_init), @@ -984,82 +463,3 @@ struct ab8500_regulator_platform_data ab .ext_regulator = ab8500_ext_regulators, .num_ext_regulator = ARRAY_SIZE(ab8500_ext_regulators), }; - -struct ab8500_regulator_platform_data ab8505_regulator_plat_data = { - .reg_init = ab8505_reg_init, - .num_reg_init = ARRAY_SIZE(ab8505_reg_init), - .regulator = ab8505_regulators, - .num_regulator = ARRAY_SIZE(ab8505_regulators), -}; - -static void ab8500_modify_reg_init(int id, u8 mask, u8 value) -{ - int i; - - if (cpu_is_u8520()) { - for (i = ARRAY_SIZE(ab8505_reg_init) - 1; i >= 0; i--) { - if (ab8505_reg_init[i].id == id) { - u8 initval = ab8505_reg_init[i].value; - initval = (initval & ~mask) | (value & mask); - ab8505_reg_init[i].value = initval; - - BUG_ON(mask & ~ab8505_reg_init[i].mask); - return; - } - } - } else { - for (i = ARRAY_SIZE(ab8500_reg_init) - 1; i >= 0; i--) { - if (ab8500_reg_init[i].id == id) { - u8 initval = ab8500_reg_init[i].value; - initval = (initval & ~mask) | (value & mask); - ab8500_reg_init[i].value = initval; - - BUG_ON(mask & ~ab8500_reg_init[i].mask); - return; - } - } - } - - BUG_ON(1); -} - -void mop500_regulator_init(void) -{ - struct regulator_init_data *regulator; - - /* - * Temporarily turn on Vaux2 on 8520 machine - */ - if (cpu_is_u8520()) { - /* Vaux2 initialized to be on */ - ab8500_modify_reg_init(AB8505_VAUX12REGU, 0x0f, 0x05); - } - - /* - * Handle AB8500_EXT_SUPPLY2 on HREFP_V20_V50 boards (do it for - * all HREFP_V20 boards) - */ - if (cpu_is_u8500v20()) { - /* VextSupply2RequestCtrl = HP/OFF depending on VxRequest */ - ab8500_modify_reg_init(AB8500_REGUREQUESTCTRL3, 0x01, 0x01); - - /* VextSupply2SysClkReq1HPValid = SysClkReq1 controlled */ - ab8500_modify_reg_init(AB8500_REGUSYSCLKREQ1HPVALID2, - 0x20, 0x20); - - /* VextSupply2 = force HP at initialization */ - ab8500_modify_reg_init(AB8500_EXTSUPPLYREGU, 0x0c, 0x04); - - /* enable VextSupply2 during platform active */ - regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2]; - regulator->constraints.always_on = 1; - - /* disable VextSupply2 in suspend */ - regulator = &ab8500_ext_regulators[AB8500_EXT_SUPPLY2]; - regulator->constraints.state_mem.disabled = 1; - regulator->constraints.state_standby.disabled = 1; - - /* enable VextSupply2 HW control (used in suspend) */ - regulator->driver_data = (void *)&ab8500_ext_supply2; - } -} --- a/arch/arm/mach-ux500/board-mop500-regulators.h +++ b/arch/arm/mach-ux500/board-mop500-regulators.h @@ -11,14 +11,6 @@ #ifndef __BOARD_MOP500_REGULATORS_H #define __BOARD_MOP500_REGULATORS_H -#include <linux/regulator/machine.h> -#include <linux/regulator/ab8500.h> - extern struct ab8500_regulator_platform_data ab8500_regulator_plat_data; -extern struct ab8500_regulator_platform_data ab8505_regulator_plat_data; -extern struct regulator_init_data tps61052_regulator; -extern struct regulator_init_data gpio_en_3v3_regulator; - -void mop500_regulator_init(void); #endif