From: Hayes Wang <hayeswang@xxxxxxxxxxx>
[ Upstream commit aa475d935272481c9ffb1ae54eeca5c1819fbe1a ]
When enabling this, the device would wait an internal signal which
wouldn't be triggered. Then, the device couldn't enter P3 mode, so
the power consumption is increased.
Signed-off-by: Hayes Wang <hayeswang@xxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/usb/r8152.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 5f59affa94d0c..6912624eed4ad 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -29,7 +29,7 @@
#define NETNEXT_VERSION "10"
/* Information for net */
-#define NET_VERSION "10"
+#define NET_VERSION "11"
#define DRIVER_VERSION "v1." NETNEXT_VERSION "." NET_VERSION
#define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@xxxxxxxxxxx>"
@@ -104,6 +104,7 @@
#define PLA_BP_EN 0xfc38
#define USB_USB2PHY 0xb41e
+#define USB_SSPHYLINK1 0xb426
#define USB_SSPHYLINK2 0xb428
#define USB_U2P3_CTRL 0xb460
#define USB_CSR_DUMMY1 0xb464
@@ -363,6 +364,9 @@
#define USB2PHY_SUSPEND 0x0001
#define USB2PHY_L1 0x0002
+/* USB_SSPHYLINK1 */
+#define DELAY_PHY_PWR_CHG BIT(1)
+
/* USB_SSPHYLINK2 */
#define pwd_dn_scale_mask 0x3ffe
#define pwd_dn_scale(x) ((x) << 1)
@@ -4030,6 +4034,10 @@ static void rtl8153_up(struct r8152 *tp)
ocp_data &= ~LANWAKE_PIN;
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG, ocp_data);
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_SSPHYLINK1);
+ ocp_data &= ~DELAY_PHY_PWR_CHG;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_SSPHYLINK1, ocp_data);
+
r8153_aldps_en(tp, true);
switch (tp->version) {
--
2.20.1
