From: Hayes Wang <hayeswang@xxxxxxxxxxx>
[ Upstream commit 19813162895a696c5814d76e5f8fb6203d70f6e0 ]
Avoid the MCU to clear the lanwake after suspending. It may cause the
WOL fail. Disable LANWAKE_CLR_EN before suspending. Besides,enable it
and reset the lanwake status when resuming or initializing.
Signed-off-by: Hayes Wang <hayeswang@xxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/usb/r8152.c | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 1f61859baa531..5f59affa94d0c 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -63,6 +63,7 @@
#define PLA_LED_FEATURE 0xdd92
#define PLA_PHYAR 0xde00
#define PLA_BOOT_CTRL 0xe004
+#define PLA_LWAKE_CTRL_REG 0xe007
#define PLA_GPHY_INTR_IMR 0xe022
#define PLA_EEE_CR 0xe040
#define PLA_EEEP_CR 0xe080
@@ -90,6 +91,7 @@
#define PLA_TALLYCNT 0xe890
#define PLA_SFF_STS_7 0xe8de
#define PLA_PHYSTATUS 0xe908
+#define PLA_CONFIG6 0xe90a /* CONFIG6 */
#define PLA_BP_BA 0xfc26
#define PLA_BP_0 0xfc28
#define PLA_BP_1 0xfc2a
@@ -286,6 +288,9 @@
#define LINK_ON_WAKE_EN 0x0010
#define LINK_OFF_WAKE_EN 0x0008
+/* PLA_CONFIG6 */
+#define LANWAKE_CLR_EN BIT(0)
+
/* PLA_CONFIG5 */
#define BWF_EN 0x0040
#define MWF_EN 0x0020
@@ -342,6 +347,9 @@
/* PLA_BOOT_CTRL */
#define AUTOLOAD_DONE 0x0002
+/* PLA_LWAKE_CTRL_REG */
+#define LANWAKE_PIN BIT(7)
+
/* PLA_SUSPEND_FLAG */
#define LINK_CHG_EVENT BIT(0)
@@ -4004,6 +4012,8 @@ static void rtl8152_down(struct r8152 *tp)
static void rtl8153_up(struct r8152 *tp)
{
+ u32 ocp_data;
+
if (test_bit(RTL8152_UNPLUG, &tp->flags))
return;
@@ -4011,6 +4021,15 @@ static void rtl8153_up(struct r8152 *tp)
r8153_u2p3en(tp, false);
r8153_aldps_en(tp, false);
r8153_first_init(tp);
+
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6);
+ ocp_data |= LANWAKE_CLR_EN;
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6, ocp_data);
+
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG);
+ ocp_data &= ~LANWAKE_PIN;
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG, ocp_data);
+
r8153_aldps_en(tp, true);
switch (tp->version) {
@@ -4029,11 +4048,17 @@ static void rtl8153_up(struct r8152 *tp)
static void rtl8153_down(struct r8152 *tp)
{
+ u32 ocp_data;
+
if (test_bit(RTL8152_UNPLUG, &tp->flags)) {
rtl_drop_queued_tx(tp);
return;
}
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6);
+ ocp_data &= ~LANWAKE_CLR_EN;
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6, ocp_data);
+
r8153_u1u2en(tp, false);
r8153_u2p3en(tp, false);
r8153_power_cut_en(tp, false);
@@ -4465,6 +4490,14 @@ static void r8153_init(struct r8152 *tp)
r8153_mac_clk_spd(tp, false);
usb_enable_lpm(tp->udev);
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6);
+ ocp_data |= LANWAKE_CLR_EN;
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6, ocp_data);
+
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG);
+ ocp_data &= ~LANWAKE_PIN;
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG, ocp_data);
+
/* rx aggregation */
ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
--
2.20.1
