From: Sean Nyekjaer <sean@xxxxxxxxxx> [ Upstream commit c3083124e6a1c0d6cd4fe3b3f627b488bd3b10c4 ] It's a good idea to reset a ip-block/spi device before using it, this patch will reset the device. And a generic reset function if needed elsewhere. Signed-off-by: Sean Nyekjaer <sean@xxxxxxxxxx> Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/net/can/m_can/tcan4x5x.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) diff --git a/drivers/net/can/m_can/tcan4x5x.c b/drivers/net/can/m_can/tcan4x5x.c index d797912e665a5..b233756345f83 100644 --- a/drivers/net/can/m_can/tcan4x5x.c +++ b/drivers/net/can/m_can/tcan4x5x.c @@ -164,6 +164,28 @@ static void tcan4x5x_check_wake(struct tcan4x5x_priv *priv) } } +static int tcan4x5x_reset(struct tcan4x5x_priv *priv) +{ + int ret = 0; + + if (priv->reset_gpio) { + gpiod_set_value(priv->reset_gpio, 1); + + /* tpulse_width minimum 30us */ + usleep_range(30, 100); + gpiod_set_value(priv->reset_gpio, 0); + } else { + ret = regmap_write(priv->regmap, TCAN4X5X_CONFIG, + TCAN4X5X_SW_RESET); + if (ret) + return ret; + } + + usleep_range(700, 1000); + + return ret; +} + static int regmap_spi_gather_write(void *context, const void *reg, size_t reg_len, const void *val, size_t val_len) @@ -341,6 +363,7 @@ static int tcan4x5x_init(struct m_can_classdev *cdev) static int tcan4x5x_parse_config(struct m_can_classdev *cdev) { struct tcan4x5x_priv *tcan4x5x = cdev->device_data; + int ret; tcan4x5x->device_wake_gpio = devm_gpiod_get(cdev->dev, "device-wake", GPIOD_OUT_HIGH); @@ -354,7 +377,9 @@ static int tcan4x5x_parse_config(struct m_can_classdev *cdev) if (IS_ERR(tcan4x5x->reset_gpio)) tcan4x5x->reset_gpio = NULL; - usleep_range(700, 1000); + ret = tcan4x5x_reset(tcan4x5x); + if (ret) + return ret; tcan4x5x->device_state_gpio = devm_gpiod_get_optional(cdev->dev, "device-state", -- 2.20.1