From: Petr Machata <petrm@xxxxxxxxxxxx>
[ Upstream commit 8b931821aa04823e2e5df0ae93937baabbd23286 ]
Add QEEC.mise (minimum shaper enable) and QEEC.min_shaper_rate to enable
configuration of minimum shaper.
Increase the QEEC length to 0x20 as well: that's the length that the
register has had for a long time now, but with the configurations that
mlxsw typically exercises, the firmware tolerated 0x1C-sized packets.
With mise=true however, FW rejects packets unless they have the full
required length.
Fixes: b9b7cee40579 ("mlxsw: reg: Add QoS ETS Element Configuration register")
Signed-off-by: Petr Machata <petrm@xxxxxxxxxxxx>
Signed-off-by: Ido Schimmel <idosch@xxxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/ethernet/mellanox/mlxsw/reg.h | 22 +++++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index b2a745b579fd1..fdc69218c8cac 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -1873,7 +1873,7 @@ static inline void mlxsw_reg_qtct_pack(char *payload, u8 local_port,
* Configures the ETS elements.
*/
#define MLXSW_REG_QEEC_ID 0x400D
-#define MLXSW_REG_QEEC_LEN 0x1C
+#define MLXSW_REG_QEEC_LEN 0x20
static const struct mlxsw_reg_info mlxsw_reg_qeec = {
.id = MLXSW_REG_QEEC_ID,
@@ -1918,6 +1918,15 @@ MLXSW_ITEM32(reg, qeec, element_index, 0x04, 0, 8);
*/
MLXSW_ITEM32(reg, qeec, next_element_index, 0x08, 0, 8);
+/* reg_qeec_mise
+ * Min shaper configuration enable. Enables configuration of the min
+ * shaper on this ETS element
+ * 0 - Disable
+ * 1 - Enable
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, qeec, mise, 0x0C, 31, 1);
+
enum {
MLXSW_REG_QEEC_BYTES_MODE,
MLXSW_REG_QEEC_PACKETS_MODE,
@@ -1934,6 +1943,17 @@ enum {
*/
MLXSW_ITEM32(reg, qeec, pb, 0x0C, 28, 1);
+/* The smallest permitted min shaper rate. */
+#define MLXSW_REG_QEEC_MIS_MIN 200000 /* Kbps */
+
+/* reg_qeec_min_shaper_rate
+ * Min shaper information rate.
+ * For CPU port, can only be configured for port hierarchy.
+ * When in bytes mode, value is specified in units of 1000bps.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, qeec, min_shaper_rate, 0x0C, 0, 28);
+
/* reg_qeec_mase
* Max shaper configuration enable. Enables configuration of the max
* shaper on this ETS element.
--
2.20.1
