From: Faiz Abbas <faiz_abbas@xxxxxx> commit de31f6ab68a3f548d88686d53514f252d78f61d5 upstream. The tuning data is leftover in the buffer after tuning. This can cause issues in future data commands, especially with CQHCI. Reset the command and data lines after tuning to continue from a clean state. Fixes: 41fd4caeb00b ("mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver") Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Faiz Abbas <faiz_abbas@xxxxxx> Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx> Link: https://lore.kernel.org/r/20200108143301.1929-3-faiz_abbas@xxxxxx Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/mmc/host/sdhci_am654.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) --- a/drivers/mmc/host/sdhci_am654.c +++ b/drivers/mmc/host/sdhci_am654.c @@ -236,6 +236,22 @@ static void sdhci_am654_write_b(struct s writeb(val, host->ioaddr + reg); } +static int sdhci_am654_execute_tuning(struct mmc_host *mmc, u32 opcode) +{ + struct sdhci_host *host = mmc_priv(mmc); + int err = sdhci_execute_tuning(mmc, opcode); + + if (err) + return err; + /* + * Tuning data remains in the buffer after tuning. + * Do a command and data reset to get rid of it + */ + sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA); + + return 0; +} + static struct sdhci_ops sdhci_am654_ops = { .get_max_clock = sdhci_pltfm_clk_get_max_clock, .get_timeout_clock = sdhci_pltfm_clk_get_max_clock, @@ -477,6 +493,8 @@ static int sdhci_am654_probe(struct plat goto pm_runtime_put; } + host->mmc_host_ops.execute_tuning = sdhci_am654_execute_tuning; + ret = sdhci_am654_init(host); if (ret) goto pm_runtime_put;