From: Daniel Golle <daniel@xxxxxxxxxxxxxx> [ Upstream commit a1f7c2cabf701a17b1a05d6526bbdadc3d05e05c ] On 2019-10-28 06:07, wbob wrote: > Hello Roman, > > while reading around drivers/net/wireless/ralink/rt2x00/rt2800lib.c > I stumbled on what I think is an edit of yours made in error in march > 2017: > > https://github.com/torvalds/linux/commit/41977e86#diff-dae5dc10da180f3b055809a48118e18aR5281 > > RT6352 in line 5281 should not have been introduced as the "else if" > below line 5291 can then not take effect for a RT6352 device. Another > possibility is for line 5291 to be not for RT6352, but this seems > very unlikely. Are you able to clarify still after this substantial time? > > 5277: static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) > ... > 5279: } else if (rt2x00_rt(rt2x00dev, RT5390) || > 5280: rt2x00_rt(rt2x00dev, RT5392) || > 5281: rt2x00_rt(rt2x00dev, RT6352)) { > ... > 5291: } else if (rt2x00_rt(rt2x00dev, RT6352)) { > ... Hence remove errornous line 5281 to make the driver actually execute the correct initialization routine for MT7620 chips. As it was requested by Stanislaw Gruszka remove setting values of MIMO_PS_CFG and TX_PIN_CFG. MIMO_PS_CFG is responsible for MIMO power-safe mode (which is disabled), hence we can drop setting it. TX_PIN_CFG is set correctly in other functions, and as setting this value breaks some devices, rather don't set it here during init, but only modify it later on. Fixes: 41977e86c984 ("rt2x00: add support for MT7620") Reported-by: wbob <wbob@xxxxxxx> Reported-by: Roman Yeryomin <roman@xxxxxxxx> Signed-off-by: Daniel Golle <daniel@xxxxxxxxxxxxxx> Acked-by: Stanislaw Gruszka <sgruszka@xxxxxxxxxx> Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c index f1cdcd61c54a5..c99f1912e2660 100644 --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c @@ -5839,8 +5839,7 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) rt2800_register_write(rt2x00dev, TX_TXBF_CFG_0, 0x8000fc21); rt2800_register_write(rt2x00dev, TX_TXBF_CFG_3, 0x00009c40); } else if (rt2x00_rt(rt2x00dev, RT5390) || - rt2x00_rt(rt2x00dev, RT5392) || - rt2x00_rt(rt2x00dev, RT6352)) { + rt2x00_rt(rt2x00dev, RT5392)) { rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404); rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); @@ -5854,8 +5853,6 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000401); rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0000); rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); - rt2800_register_write(rt2x00dev, MIMO_PS_CFG, 0x00000002); - rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0x00150F0F); rt2800_register_write(rt2x00dev, TX_ALC_VGA3, 0x00000000); rt2800_register_write(rt2x00dev, TX0_BB_GAIN_ATTEN, 0x0); rt2800_register_write(rt2x00dev, TX1_BB_GAIN_ATTEN, 0x0); -- 2.20.1
