From: Florian Fainelli <f.fainelli@xxxxxxxxx>
commit fea7fda7f50a6059220f83251e70709e45cc8040 upstream.
Commit 0fc9ae107669 ("net: phy: broadcom: add support for
BCM54210E") added support for BCM54210E but also unconditionally cleared
the RXC to RXD skew and the TXD to TXC skew, thus only making
PHY_INTERFACE_MODE_RGMII a possible configuration. Use
bcm54xx_config_clock_delay() which correctly sets the registers
depending on the 4 possible PHY interface values that exist for RGMII.
Fixes: 0fc9ae107669 ("net: phy: broadcom: add support for BCM54210E")
Reported-by: Manasa Mudireddy <manasa.mudireddy@xxxxxxxxxxxx>
Reported-by: Ray Jui <ray.jui@xxxxxxxxxxxx>
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/phy/broadcom.c | 11 +++--------
1 file changed, 3 insertions(+), 8 deletions(-)
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -26,18 +26,13 @@ MODULE_DESCRIPTION("Broadcom PHY driver"
MODULE_AUTHOR("Maciej W. Rozycki");
MODULE_LICENSE("GPL");
+static int bcm54xx_config_clock_delay(struct phy_device *phydev);
+
static int bcm54210e_config_init(struct phy_device *phydev)
{
int val;
- val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
- val &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN;
- val |= MII_BCM54XX_AUXCTL_MISC_WREN;
- bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC, val);
-
- val = bcm_phy_read_shadow(phydev, BCM54810_SHD_CLK_CTL);
- val &= ~BCM54810_SHD_CLK_CTL_GTXCLK_EN;
- bcm_phy_write_shadow(phydev, BCM54810_SHD_CLK_CTL, val);
+ bcm54xx_config_clock_delay(phydev);
if (phydev->dev_flags & PHY_BRCM_EN_MASTER_MODE) {
val = phy_read(phydev, MII_CTRL1000);
