From: Esben Haabendal <esben@xxxxxxxxxx>
commit 5bc6bb603b4d0c8802af75e4932232683ab2d761 upstream.
On system resume, the gpmi clock must be enabled before accessing gpmi
block. Without this, resume causes something like
[ 661.348790] gpmi_reset_block(5cbb0f7e): module reset timeout
[ 661.348889] gpmi-nand 1806000.gpmi-nand: Error setting GPMI : -110
[ 661.348928] PM: dpm_run_callback(): platform_pm_resume+0x0/0x44 returns -110
[ 661.348961] PM: Device 1806000.gpmi-nand failed to resume: error -110
Fixes: ef347c0cfd61 ("mtd: rawnand: gpmi: Implement exec_op")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Esben Haabendal <esben@xxxxxxxxxx>
Acked-by: Han Xu <han.xu@xxxxxxx>
Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -148,6 +148,10 @@ static int gpmi_init(struct gpmi_nand_da
struct resources *r = &this->resources;
int ret;
+ ret = pm_runtime_get_sync(this->dev);
+ if (ret < 0)
+ return ret;
+
ret = gpmi_reset_block(r->gpmi_regs, false);
if (ret)
goto err_out;
@@ -179,8 +183,9 @@ static int gpmi_init(struct gpmi_nand_da
*/
writel(BM_GPMI_CTRL1_DECOUPLE_CS, r->gpmi_regs + HW_GPMI_CTRL1_SET);
- return 0;
err_out:
+ pm_runtime_mark_last_busy(this->dev);
+ pm_runtime_put_autosuspend(this->dev);
return ret;
}
