This is a note to let you know that I've just added the patch titled
iio: st_gyro: Correct data for LSM9DS0 gyro
to my staging git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
in the staging-testing branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will be merged to the staging-next branch sometime soon,
after it passes testing, and the merge window is open.
If you have any questions about this process, please let me know.
>From e825070f697abddf3b9b0a675ed0ff1884114818 Mon Sep 17 00:00:00 2001
From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Date: Tue, 17 Dec 2019 19:10:38 +0200
Subject: iio: st_gyro: Correct data for LSM9DS0 gyro
The commit 41c128cb25ce ("iio: st_gyro: Add lsm9ds0-gyro support")
assumes that gyro in LSM9DS0 is the same as others with 0xd4 WAI ID,
but datasheet tells slight different story, i.e. the first scale factor
for the chip is 245 dps, and not 250 dps.
Correct this by introducing a separate settings for LSM9DS0.
Fixes: 41c128cb25ce ("iio: st_gyro: Add lsm9ds0-gyro support")
Depends-on: 45a4e4220bf4 ("iio: gyro: st_gyro: fix L3GD20H support")
Cc: Leonard Crestez <leonard.crestez@xxxxxxx>
Cc: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
Cc: <Stable@xxxxxxxxxxxxxxx>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
---
drivers/iio/gyro/st_gyro_core.c | 75 ++++++++++++++++++++++++++++++++-
1 file changed, 74 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
index 57be68b291fa..26c50b24bc08 100644
--- a/drivers/iio/gyro/st_gyro_core.c
+++ b/drivers/iio/gyro/st_gyro_core.c
@@ -138,7 +138,6 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
[2] = LSM330DLC_GYRO_DEV_NAME,
[3] = L3G4IS_GYRO_DEV_NAME,
[4] = LSM330_GYRO_DEV_NAME,
- [5] = LSM9DS0_GYRO_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_gyro_16bit_channels,
.odr = {
@@ -208,6 +207,80 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
.multi_read_bit = true,
.bootime = 2,
},
+ {
+ .wai = 0xd4,
+ .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+ .sensors_supported = {
+ [0] = LSM9DS0_GYRO_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_gyro_16bit_channels,
+ .odr = {
+ .addr = 0x20,
+ .mask = GENMASK(7, 6),
+ .odr_avl = {
+ { .hz = 95, .value = 0x00, },
+ { .hz = 190, .value = 0x01, },
+ { .hz = 380, .value = 0x02, },
+ { .hz = 760, .value = 0x03, },
+ },
+ },
+ .pw = {
+ .addr = 0x20,
+ .mask = BIT(3),
+ .value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .enable_axis = {
+ .addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+ .mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+ },
+ .fs = {
+ .addr = 0x23,
+ .mask = GENMASK(5, 4),
+ .fs_avl = {
+ [0] = {
+ .num = ST_GYRO_FS_AVL_245DPS,
+ .value = 0x00,
+ .gain = IIO_DEGREE_TO_RAD(8750),
+ },
+ [1] = {
+ .num = ST_GYRO_FS_AVL_500DPS,
+ .value = 0x01,
+ .gain = IIO_DEGREE_TO_RAD(17500),
+ },
+ [2] = {
+ .num = ST_GYRO_FS_AVL_2000DPS,
+ .value = 0x02,
+ .gain = IIO_DEGREE_TO_RAD(70000),
+ },
+ },
+ },
+ .bdu = {
+ .addr = 0x23,
+ .mask = BIT(7),
+ },
+ .drdy_irq = {
+ .int2 = {
+ .addr = 0x22,
+ .mask = BIT(3),
+ },
+ /*
+ * The sensor has IHL (active low) and open
+ * drain settings, but only for INT1 and not
+ * for the DRDY line on INT2.
+ */
+ .stat_drdy = {
+ .addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .mask = GENMASK(2, 0),
+ },
+ },
+ .sim = {
+ .addr = 0x23,
+ .value = BIT(0),
+ },
+ .multi_read_bit = true,
+ .bootime = 2,
+ },
{
.wai = 0xd7,
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
--
2.25.0
