From: Matthias Kaehlcke <mka@xxxxxxxxxxxx> [ Upstream commit bf45ac18b78038e43af3c1a273cae4ab5704d2ce ] The CPU load values passed to the thermal_power_cpu_get_power tracepoint are zero for all CPUs, unless, unless the thermal_power_cpu_limit tracepoint is enabled too: irq/41-rockchip-98 [000] .... 290.972410: thermal_power_cpu_get_power: cpus=0000000f freq=1800000 load={{0x0,0x0,0x0,0x0}} dynamic_power=4815 vs irq/41-rockchip-96 [000] .... 95.773585: thermal_power_cpu_get_power: cpus=0000000f freq=1800000 load={{0x56,0x64,0x64,0x5e}} dynamic_power=4959 irq/41-rockchip-96 [000] .... 95.773596: thermal_power_cpu_limit: cpus=0000000f freq=408000 cdev_state=10 power=416 There seems to be no good reason for omitting the CPU load information depending on another tracepoint. My guess is that the intention was to check whether thermal_power_cpu_get_power is (still) enabled, however 'load_cpu != NULL' already indicates that it was at least enabled when cpufreq_get_requested_power() was entered, there seems little gain from omitting the assignment if the tracepoint was just disabled, so just remove the check. Fixes: 6828a4711f99 ("thermal: add trace events to the power allocator governor") Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx> Reviewed-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx> Acked-by: Javi Merino <javi.merino@xxxxxxxxxx> Acked-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx> Signed-off-by: Eduardo Valentin <edubezval@xxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/thermal/cpu_cooling.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index 87d87ac1c8a0..96567b4a4f20 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -607,7 +607,7 @@ static int cpufreq_get_requested_power(struct thermal_cooling_device *cdev, load = 0; total_load += load; - if (trace_thermal_power_cpu_limit_enabled() && load_cpu) + if (load_cpu) load_cpu[i] = load; i++; -- 2.20.1