From: Tony Lindgren <tony@xxxxxxxxxxx> commit 4acb0200ab2b07843e3ef5599add3454c7440f03 upstream. If musb_mailbox() returns an error, we must still continue to finish configuring the phy. Otherwise the phy state may end up only half initialized, and this can cause the debug serial console to stop working. And this will happen if the usb driver musb controller is not loaded. Let's fix the issue by adding helper for cpcap_usb_try_musb_mailbox(). Fixes: 6d6ce40f63af ("phy: cpcap-usb: Add CPCAP PMIC USB support") Cc: Merlijn Wajer <merlijn@xxxxxxxxxx> Cc: Pavel Machek <pavel@xxxxxx> Cc: Sebastian Reichel <sre@xxxxxxxxxx> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/phy/motorola/phy-cpcap-usb.c | 33 ++++++++++++++++++--------------- 1 file changed, 18 insertions(+), 15 deletions(-) --- a/drivers/phy/motorola/phy-cpcap-usb.c +++ b/drivers/phy/motorola/phy-cpcap-usb.c @@ -207,6 +207,19 @@ static int cpcap_phy_get_ints_state(stru static int cpcap_usb_set_uart_mode(struct cpcap_phy_ddata *ddata); static int cpcap_usb_set_usb_mode(struct cpcap_phy_ddata *ddata); +static void cpcap_usb_try_musb_mailbox(struct cpcap_phy_ddata *ddata, + enum musb_vbus_id_status status) +{ + int error; + + error = musb_mailbox(status); + if (!error) + return; + + dev_dbg(ddata->dev, "%s: musb_mailbox failed: %i\n", + __func__, error); +} + static void cpcap_usb_detect(struct work_struct *work) { struct cpcap_phy_ddata *ddata; @@ -226,9 +239,7 @@ static void cpcap_usb_detect(struct work if (error) goto out_err; - error = musb_mailbox(MUSB_ID_GROUND); - if (error) - goto out_err; + cpcap_usb_try_musb_mailbox(ddata, MUSB_ID_GROUND); error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3, CPCAP_BIT_VBUSSTBY_EN | @@ -257,9 +268,7 @@ static void cpcap_usb_detect(struct work error = cpcap_usb_set_usb_mode(ddata); if (error) goto out_err; - error = musb_mailbox(MUSB_ID_GROUND); - if (error) - goto out_err; + cpcap_usb_try_musb_mailbox(ddata, MUSB_ID_GROUND); return; } @@ -269,9 +278,7 @@ static void cpcap_usb_detect(struct work error = cpcap_usb_set_usb_mode(ddata); if (error) goto out_err; - error = musb_mailbox(MUSB_VBUS_VALID); - if (error) - goto out_err; + cpcap_usb_try_musb_mailbox(ddata, MUSB_VBUS_VALID); return; } @@ -281,9 +288,7 @@ static void cpcap_usb_detect(struct work if (error) goto out_err; - error = musb_mailbox(MUSB_VBUS_OFF); - if (error) - goto out_err; + cpcap_usb_try_musb_mailbox(ddata, MUSB_VBUS_OFF); dev_dbg(ddata->dev, "set UART mode\n"); @@ -649,9 +654,7 @@ static int cpcap_usb_phy_remove(struct p if (error) dev_err(ddata->dev, "could not set UART mode\n"); - error = musb_mailbox(MUSB_VBUS_OFF); - if (error) - dev_err(ddata->dev, "could not set mailbox\n"); + cpcap_usb_try_musb_mailbox(ddata, MUSB_VBUS_OFF); usb_remove_phy(&ddata->phy); cancel_delayed_work_sync(&ddata->detect_work);