[PATCH 4.19 29/84] spi: spi-ti-qspi: Fix a bug when accessing non default CS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Vignesh Raghavendra <vigneshr@xxxxxx>

[ Upstream commit c52c91bb9aa6bd8c38dbf9776158e33038aedd43 ]

When switching ChipSelect from default CS0 to any other CS, driver fails
to update the bits in system control module register that control which
CS is mapped for MMIO access. This causes reads to fail when driver
tries to access QSPI flash on CS1/2/3.

Fix this by updating appropriate bits whenever active CS changes.

Reported-by: Andreas Dannenberg <dannenberg@xxxxxx>
Signed-off-by: Vignesh Raghavendra <vigneshr@xxxxxx>
Link: https://lore.kernel.org/r/20191211155216.30212-1-vigneshr@xxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/spi/spi-ti-qspi.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index b9fb6493cd6b..95c28abaa027 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -69,6 +69,7 @@ struct ti_qspi {
 	u32 dc;
 
 	bool mmap_enabled;
+	int current_cs;
 };
 
 #define QSPI_PID			(0x0)
@@ -494,6 +495,7 @@ static void ti_qspi_enable_memory_map(struct spi_device *spi)
 				   MEM_CS_EN(spi->chip_select));
 	}
 	qspi->mmap_enabled = true;
+	qspi->current_cs = spi->chip_select;
 }
 
 static void ti_qspi_disable_memory_map(struct spi_device *spi)
@@ -505,6 +507,7 @@ static void ti_qspi_disable_memory_map(struct spi_device *spi)
 		regmap_update_bits(qspi->ctrl_base, qspi->ctrl_reg,
 				   MEM_CS_MASK, 0);
 	qspi->mmap_enabled = false;
+	qspi->current_cs = -1;
 }
 
 static void ti_qspi_setup_mmap_read(struct spi_device *spi, u8 opcode,
@@ -550,7 +553,7 @@ static int ti_qspi_exec_mem_op(struct spi_mem *mem,
 
 	mutex_lock(&qspi->list_lock);
 
-	if (!qspi->mmap_enabled)
+	if (!qspi->mmap_enabled || qspi->current_cs != mem->spi->chip_select)
 		ti_qspi_enable_memory_map(mem->spi);
 	ti_qspi_setup_mmap_read(mem->spi, op->cmd.opcode, op->data.buswidth,
 				op->addr.nbytes, op->dummy.nbytes);
@@ -807,6 +810,7 @@ static int ti_qspi_probe(struct platform_device *pdev)
 		}
 	}
 	qspi->mmap_enabled = false;
+	qspi->current_cs = -1;
 
 	ret = devm_spi_register_master(&pdev->dev, master);
 	if (!ret)
-- 
2.20.1






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux