From: Jose Abreu <Jose.Abreu@xxxxxxxxxxxx>
[ Upstream commit eaf4fac478077d4ed57cbca2c044c4b58a96bd98 ]
The maximum MTU value is determined by the maximum size of TX FIFO so
that a full packet can fit in the FIFO. Add a check for this in the MTU
change callback.
Also check if provided and rounded MTU does not passes the maximum limit
of 16K.
Changes from v2:
- Align MTU before checking if its valid
Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver")
Signed-off-by: Jose Abreu <Jose.Abreu@xxxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index e6d16c48ffef..4ef923f1094a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3597,12 +3597,24 @@ static void stmmac_set_rx_mode(struct net_device *dev)
static int stmmac_change_mtu(struct net_device *dev, int new_mtu)
{
struct stmmac_priv *priv = netdev_priv(dev);
+ int txfifosz = priv->plat->tx_fifo_size;
+
+ if (txfifosz == 0)
+ txfifosz = priv->dma_cap.tx_fifo_size;
+
+ txfifosz /= priv->plat->tx_queues_to_use;
if (netif_running(dev)) {
netdev_err(priv->dev, "must be stopped to change its MTU\n");
return -EBUSY;
}
+ new_mtu = STMMAC_ALIGN(new_mtu);
+
+ /* If condition true, FIFO is too small or MTU too large */
+ if ((txfifosz < new_mtu) || (new_mtu > BUF_SIZE_16KiB))
+ return -EINVAL;
+
dev->mtu = new_mtu;
netdev_update_features(dev);
--
2.20.1
