Re: [PATCH 0/8] ata: ahci_brcm: Fixes and new device support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 1/7/20 9:29 AM, Naresh Kamboju wrote:
> On Tue, 7 Jan 2020 at 22:17, Naresh Kamboju <naresh.kamboju@xxxxxxxxxx> wrote:
>>
>> On Wed, 11 Dec 2019 at 00:25, Florian Fainelli <f.fainelli@xxxxxxxxx> wrote:
>>>
>>> Hi Jens,
>>>
>>> The first 4 patches are fixes and should ideally be queued up/picked up
>>> by stable. The last 4 patches add support for BCM7216 which is one of
>>> our latest devices supported by this driver.
>>>
>>> Patch #2 does a few things, but it was pretty badly broken before and it
>>> is hard not to fix all call sites (probe, suspend, resume) in one shot.
>>>
>>> Please let me know if you have any comments.
>>>
>>> Thanks!
>>>
>>> Florian Fainelli (8):
>>>   ata: libahci_platform: Export again ahci_platform_<en/dis>able_phys()
>>>   ata: ahci_brcm: Fix AHCI resources management
>>
>> Following error on stable-rc 4.14 and 4.9 branch for arm build.
> 
> Following error on stable-rc 4.19, 4.14 and 4.9 branch for arm build.
> 
>>
>>  drivers/ata/ahci_brcm.c: In function 'brcm_ahci_probe':
>>  drivers/ata/ahci_brcm.c:412:28: error: 'struct brcm_ahci_priv' has no
>> member named 'rcdev'; did you mean 'dev'?
>>    if (!IS_ERR_OR_NULL(priv->rcdev))
>>                              ^~~~~
>>                              dev
>>    CC      fs/pnode.o
>>    CC      block/genhd.o
>>  drivers/ata/ahci_brcm.c:413:3: error: implicit declaration of
>> function 'reset_control_assert'; did you mean 'ahci_reset_controller'?
>> [-Werror=implicit-function-declaration]
>>     reset_control_assert(priv->rcdev);
>>     ^~~~~~~~~~~~~~~~~~~~
>>     ahci_reset_controller
>>  drivers/ata/ahci_brcm.c:413:30: error: 'struct brcm_ahci_priv' has no
>> member named 'rcdev'; did you mean 'dev'?
>>     reset_control_assert(priv->rcdev);
>>                                ^~~~~
>>                                dev
>>  cc1: some warnings being treated as errors
>>
>> Full build log links,
>> https://ci.linaro.org/view/lkft/job/openembedded-lkft-linux-stable-rc-4.14/DISTRO=lkft,MACHINE=am57xx-evm,label=docker-lkft/702/consoleText
>> https://ci.linaro.org/view/lkft/job/openembedded-lkft-linux-stable-rc-4.9/DISTRO=lkft,MACHINE=am57xx-evm,label=docker-lkft/773/consoleText
> https://ci.linaro.org/view/lkft/job/openembedded-lkft-linux-stable-rc-4.19/DISTRO=lkft,MACHINE=am57xx-evm,label=docker-lkft/404/consoleText

The reset controller support was added in
2b2c47d9e1fe90311b725125d6252a859ee87a79 ("ata: ahci_brcm: Allow
optional reset controller to be used") which was include in v4.20 and
newer so that explains the build failure.

You may want to cherry pick that change into the respective stable
branches and then back port the fixes if that is not too much trouble.
If that does not work or is impractical, please let me know and I can
provide directed backport changes for 4.9, 4.14 and 4.19.

Thank you
-- 
Florian



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux