Hi,
Am Samstag, 21. Dezember 2019, 06:29:18 CET schrieb David Miller:
> From: Padmanabhan Rajanbabu <p.rajanbabu@xxxxxxxxxxx>
> Date: Thu, 19 Dec 2019 15:47:01 +0530
>
> > The current implementation of "stmmac_dt_phy" function initializes
> > the MDIO platform bus data, even in the absence of PHY. This fix
> > will skip MDIO initialization if there is no PHY present.
> >
> > Fixes: 7437127 ("net: stmmac: Convert to phylink and remove phylib logic")
> > Acked-by: Jayati Sahu <jayati.sahu@xxxxxxxxxxx>
> > Signed-off-by: Sriram Dash <sriram.dash@xxxxxxxxxxx>
> > Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu@xxxxxxxxxxx>
>
> Applied and queued up for -stable, thanks.
with this patch applied I now run into issues on multiple rockchip
platforms using a gmac interface.
When probing the driver and trying to establish a connection for a nfsroot
it always runs into a null pointer in mdiobus_get_phy():
[ 26.878839] rk_gmac-dwmac ff360000.ethernet: IRQ eth_wake_irq not found
[ 26.886322] rk_gmac-dwmac ff360000.ethernet: IRQ eth_lpi not found
[ 26.894505] rk_gmac-dwmac ff360000.ethernet: PTP uses main clock
[ 26.908209] rk_gmac-dwmac ff360000.ethernet: clock input or output? (output).
[ 26.916269] rk_gmac-dwmac ff360000.ethernet: Can not read property: tx_delay.
[ 26.924297] rk_gmac-dwmac ff360000.ethernet: set tx_delay to 0x30
[ 26.931150] rk_gmac-dwmac ff360000.ethernet: Can not read property: rx_delay.
[ 26.939166] rk_gmac-dwmac ff360000.ethernet: set rx_delay to 0x10
[ 26.946021] rk_gmac-dwmac ff360000.ethernet: integrated PHY? (no).
[ 26.953032] rk_gmac-dwmac ff360000.ethernet: cannot get clock clk_mac_refout
[ 26.966161] rk_gmac-dwmac ff360000.ethernet: init for RMII
[ 26.972633] rk_gmac-dwmac ff360000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[ 26.980830] rk_gmac-dwmac ff360000.ethernet: DWMAC1000
[ 26.986735] rk_gmac-dwmac ff360000.ethernet: DMA HW capability register supported
[ 26.995145] rk_gmac-dwmac ff360000.ethernet: RX Checksum Offload Engine supported
[ 27.003540] rk_gmac-dwmac ff360000.ethernet: COE Type 2
[ 27.009408] rk_gmac-dwmac ff360000.ethernet: TX Checksum insertion supported
[ 27.017320] rk_gmac-dwmac ff360000.ethernet: Wake-Up On Lan supported
[ 27.024577] rk_gmac-dwmac ff360000.ethernet: Normal descriptors
[ 27.031211] rk_gmac-dwmac ff360000.ethernet: Ring mode enabled
[ 27.037743] rk_gmac-dwmac ff360000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 27.209823] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000398
2IP-Config: eth0 hardware address 66:e4:9b:b1:30:c3 mtu 1500 DHCP
7.219681] Mem abort info:
[ 27.229322] ESR = 0x96000006
[ 27.229328] EC = 0x25: DABT (current EL), IL = 32 bits
[ 27.229330] SET = 0, FnV = 0
[ 27.229332] EA = 0, S1PTW = 0
[ 27.229334] Data abort info:
[ 27.229336] ISV = 0, ISS = 0x00000006
[ 27.229338] CM = 0, WnR = 0
[ 27.229342] user pgtable: 4k pages, 48-bit VAs, pgdp=000000003e7d4000
[ 27.229345] [0000000000000398] pgd=0000000036739003, pud=0000000035894003, pmd=0000000000000000
[ 27.273398] Internal error: Oops: 96000006 [#1] SMP
[ 27.273403] Modules linked in: smsc95xx smsc75xx ax88179_178a asix usbnet panel_leadtek_ltk500hd1829 dwmac_rk stmmac_platform stmmac rockchipdrm phy_rockchip_inno_dsidphy analogix_dp dw_hdmi cec r
c_core dw_mipi_dsi drm_kms_helper rtc_rk808 drm drm_panel_orientation_quirks
[ 27.305785] CPU: 3 PID: 1388 Comm: ipconfig Not tainted 5.5.0-rc4-00934-gd57e566e6874 #1463
[ 27.305790] Hardware name: Theobroma Systems Cobra with Leadtek Display (DT)
[ 27.323006] pstate: 40000005 (nZcv daif -PAN -UAO)
[ 27.323020] pc : mdiobus_get_phy+0x4/0x20
[ 27.332867] lr : stmmac_open+0x780/0xa78 [stmmac]
[ 27.332872] sp : ffff80001113b9a0
[ 27.341823] x29: ffff80001113b9a0 x28: 0000000000401003
[ 27.347761] x27: ffff00003d5cf200 x26: 0000000000000000
[ 27.353699] x25: 0000000000000001 x24: 0000000000000000
[ 27.359636] x23: 0000000000001002 x22: ffff800008b790a0
[ 27.365575] x21: ffff000035f84000 x20: 00000000ffffffff
[ 27.371513] x19: ffff000035f84800 x18: 0000000000000000
[ 27.377451] x17: 0000000000000000 x16: 0000000000000000
[ 27.383389] x15: 0000000000000000 x14: ffffffffffffffff
[ 27.389328] x13: 0000000000000020 x12: 0101010101010101
[ 27.395266] x11: 0000000000000003 x10: 0101010101010101
[ 27.401203] x9 : fffffffffffffffd x8 : 7f7f7f7f7f7f7f7f
[ 27.407143] x7 : fefefeff646c606d x6 : 1e091448e4e5f6e9
[ 27.413074] x5 : 697665644814091e x4 : 8080808000000000
[ 27.419013] x3 : 8343c96b232bb348 x2 : ffff00003d63f880
[ 27.424953] x1 : fffffffffffffff8 x0 : 0000000000000000
[ 27.430882] Call trace:
[ 27.433620] mdiobus_get_phy+0x4/0x20
[ 27.437715] __dev_open+0xe4/0x160
[ 27.441515] __dev_change_flags+0x160/0x1b8
[ 27.446191] dev_change_flags+0x20/0x60
[ 27.450478] devinet_ioctl+0x66c/0x738
[ 27.454666] inet_ioctl+0x2f4/0x360
[ 27.458565] sock_do_ioctl+0x44/0x2b0
[ 27.462657] sock_ioctl+0x1c8/0x508
[ 27.466556] do_vfs_ioctl+0x604/0xbd0
[ 27.470646] ksys_ioctl+0x78/0xa8
[ 27.474351] __arm64_sys_ioctl+0x1c/0x28
[ 27.478737] el0_svc_common.constprop.0+0x68/0x160
[ 27.484083] el0_svc_handler+0x20/0x80
[ 27.488273] el0_sync_handler+0x10c/0x180
[ 27.492753] el0_sync+0x140/0x180
[ 27.496462] Code: 97ffffb0 a8c17bfd d65f03c0 8b21cc01 (f941d020)
[ 27.503275] ---[ end trace 6f6ca54e66af6d48 ]---
With the expected output being normally at this point:
[ 18.575321] rk_gmac-dwmac ff360000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8201F Fast Ethernet]
[ 18.602975] rk_gmac-dwmac ff360000.ethernet eth0: No Safety Features support found
[ 18.611505] rk_gmac-dwmac ff360000.ethernet eth0: PTP not supported by HW
[ 18.619117] rk_gmac-dwmac ff360000.ethernet eth0: configuring for phy/rmii link mode
[ 22.719478] rk_gmac-dwmac ff360000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
or
[ 27.326984] rk_gmac-dwmac ff360000.ethernet eth0: PHY [stmmac-0:00] driver [Generic PHY]
[ 27.353543] rk_gmac-dwmac ff360000.ethernet eth0: No Safety Features support found
[ 27.362055] rk_gmac-dwmac ff360000.ethernet eth0: PTP not supported by HW
[ 27.369663] rk_gmac-dwmac ff360000.ethernet eth0: configuring for phy/rmii link mode
[ 29.406784] rk_gmac-dwmac ff360000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
This is torvalds git head and it was still working at -rc1 and all kernels
before that. When I just revert this commit, things also start working
again, so I guess something must be wrong here?
Thanks
Heiko
