Hi Samuel,
On Sun, Jan 5, 2020 at 12:24 PM Samuel Holland <samuel@xxxxxxxxxxxx> wrote:
>
> AXP803/AXP813 have a flag that enables/disables the AC power supply
> input. This flag does not affect the status bits in PWR_INPUT_STATUS.
> Its effect can be verified by checking the battery charge/discharge
> state (bit 2 of PWR_INPUT_STATUS), or by examining the current draw on
> the AC input.
>
> Take this flag into account when getting the ONLINE property of the AC
> input, on PMICs where this flag is present.
>
> Fixes: 7693b5643fd2 ("power: supply: add AC power supply driver for AXP813")
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx>
> ---
> drivers/power/supply/axp20x_ac_power.c | 31 +++++++++++++++++++++-----
> 1 file changed, 25 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/power/supply/axp20x_ac_power.c b/drivers/power/supply/axp20x_ac_power.c
> index 0d34a932b6d5..ca0a28f72a27 100644
> --- a/drivers/power/supply/axp20x_ac_power.c
> +++ b/drivers/power/supply/axp20x_ac_power.c
> @@ -23,6 +23,8 @@
> #define AXP20X_PWR_STATUS_ACIN_PRESENT BIT(7)
> #define AXP20X_PWR_STATUS_ACIN_AVAIL BIT(6)
>
> +#define AXP813_ACIN_PATH_SEL BIT(7)
> +
> #define AXP813_VHOLD_MASK GENMASK(5, 3)
> #define AXP813_VHOLD_UV_TO_BIT(x) ((((x) / 100000) - 40) << 3)
> #define AXP813_VHOLD_REG_TO_UV(x) \
> @@ -40,6 +42,7 @@ struct axp20x_ac_power {
> struct power_supply *supply;
> struct iio_channel *acin_v;
> struct iio_channel *acin_i;
> + bool has_acin_path_sel;
> };
>
> static irqreturn_t axp20x_ac_power_irq(int irq, void *devid)
> @@ -86,6 +89,17 @@ static int axp20x_ac_power_get_property(struct power_supply *psy,
> return ret;
>
> val->intval = !!(reg & AXP20X_PWR_STATUS_ACIN_AVAIL);
> +
> + /* ACIN_PATH_SEL disables ACIN even if ACIN_AVAIL is set. */
> + if (power->has_acin_path_sel) {
Do we need to check this bit if ACIN_AVAIL is not set?
> + ret = regmap_read(power->regmap, AXP813_ACIN_PATH_CTRL,
> + ®);
> + if (ret)
> + return ret;
> +
> + val->intval &= !!(reg & AXP813_ACIN_PATH_SEL);
If we only check this bit if ACIN_AVAIL is set, then we don't need the
"&" in the "&=". (I'm assuming that val->intval is an int, not a bool,
otherwise this is the wrong operator)
Thanks,
--
Julian Calaby
Email: julian.calaby@xxxxxxxxx
Profile: http://www.google.com/profiles/julian.calaby/
