The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From cb47b9f8630ae3fa3f5fbd0c7003faba7abdf711 Mon Sep 17 00:00:00 2001
From: David Engraf <david.engraf@xxxxxxxxx>
Date: Mon, 16 Dec 2019 09:54:03 +0100
Subject: [PATCH] tty/serial: atmel: fix out of range clock divider handling
Use MCK_DIV8 when the clock divider is > 65535. Unfortunately the mode
register was already written thus the clock selection is ignored.
Fix by doing the baud rate calulation before setting the mode.
Fixes: 5bf5635ac170 ("tty/serial: atmel: add fractional baud rate support")
Signed-off-by: David Engraf <david.engraf@xxxxxxxxx>
Acked-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
Acked-by: Richard Genoud <richard.genoud@xxxxxxxxx>
Cc: stable <stable@xxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20191216085403.17050-1-david.engraf@xxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index a8dc8af83f39..1ba9bc667e13 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -2270,27 +2270,6 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
mode |= ATMEL_US_USMODE_NORMAL;
}
- /* set the mode, clock divisor, parity, stop bits and data size */
- atmel_uart_writel(port, ATMEL_US_MR, mode);
-
- /*
- * when switching the mode, set the RTS line state according to the
- * new mode, otherwise keep the former state
- */
- if ((old_mode & ATMEL_US_USMODE) != (mode & ATMEL_US_USMODE)) {
- unsigned int rts_state;
-
- if ((mode & ATMEL_US_USMODE) == ATMEL_US_USMODE_HWHS) {
- /* let the hardware control the RTS line */
- rts_state = ATMEL_US_RTSDIS;
- } else {
- /* force RTS line to low level */
- rts_state = ATMEL_US_RTSEN;
- }
-
- atmel_uart_writel(port, ATMEL_US_CR, rts_state);
- }
-
/*
* Set the baud rate:
* Fractional baudrate allows to setup output frequency more
@@ -2317,6 +2296,28 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
if (!(port->iso7816.flags & SER_ISO7816_ENABLED))
atmel_uart_writel(port, ATMEL_US_BRGR, quot);
+
+ /* set the mode, clock divisor, parity, stop bits and data size */
+ atmel_uart_writel(port, ATMEL_US_MR, mode);
+
+ /*
+ * when switching the mode, set the RTS line state according to the
+ * new mode, otherwise keep the former state
+ */
+ if ((old_mode & ATMEL_US_USMODE) != (mode & ATMEL_US_USMODE)) {
+ unsigned int rts_state;
+
+ if ((mode & ATMEL_US_USMODE) == ATMEL_US_USMODE_HWHS) {
+ /* let the hardware control the RTS line */
+ rts_state = ATMEL_US_RTSDIS;
+ } else {
+ /* force RTS line to low level */
+ rts_state = ATMEL_US_RTSEN;
+ }
+
+ atmel_uart_writel(port, ATMEL_US_CR, rts_state);
+ }
+
atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN | ATMEL_US_RXEN);
atmel_port->tx_stopped = false;
