From: Chaotian Jing <chaotian.jing@xxxxxxxxxxxx>
commit a0d4c7eb71dd08a89ad631177bb0cbbabd598f84 upstream.
MMC IOCTLS with R1B responses may cause the card to enter the busy state,
which means it's not ready to receive a new request. To prevent new
requests from being sent to the card, use a CMD13 polling loop to verify
that the card returns to the transfer state, before completing the request.
Signed-off-by: Chaotian Jing <chaotian.jing@xxxxxxxxxxxx>
Reviewed-by: Avri Altman <avri.altman@xxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/mmc/core/block.c | 147 +++++++++++++++++------------------------------
1 file changed, 55 insertions(+), 92 deletions(-)
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -409,38 +409,6 @@ static int mmc_blk_ioctl_copy_to_user(st
return 0;
}
-static int ioctl_rpmb_card_status_poll(struct mmc_card *card, u32 *status,
- u32 retries_max)
-{
- int err;
- u32 retry_count = 0;
-
- if (!status || !retries_max)
- return -EINVAL;
-
- do {
- err = __mmc_send_status(card, status, 5);
- if (err)
- break;
-
- if (!R1_STATUS(*status) &&
- (R1_CURRENT_STATE(*status) != R1_STATE_PRG))
- break; /* RPMB programming operation complete */
-
- /*
- * Rechedule to give the MMC device a chance to continue
- * processing the previous command without being polled too
- * frequently.
- */
- usleep_range(1000, 5000);
- } while (++retry_count < retries_max);
-
- if (retry_count == retries_max)
- err = -EPERM;
-
- return err;
-}
-
static int ioctl_do_sanitize(struct mmc_card *card)
{
int err;
@@ -469,6 +437,58 @@ out:
return err;
}
+static inline bool mmc_blk_in_tran_state(u32 status)
+{
+ /*
+ * Some cards mishandle the status bits, so make sure to check both the
+ * busy indication and the card state.
+ */
+ return status & R1_READY_FOR_DATA &&
+ (R1_CURRENT_STATE(status) == R1_STATE_TRAN);
+}
+
+static int card_busy_detect(struct mmc_card *card, unsigned int timeout_ms,
+ u32 *resp_errs)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms);
+ int err = 0;
+ u32 status;
+
+ do {
+ bool done = time_after(jiffies, timeout);
+
+ err = __mmc_send_status(card, &status, 5);
+ if (err) {
+ dev_err(mmc_dev(card->host),
+ "error %d requesting status\n", err);
+ return err;
+ }
+
+ /* Accumulate any response error bits seen */
+ if (resp_errs)
+ *resp_errs |= status;
+
+ /*
+ * Timeout if the device never becomes ready for data and never
+ * leaves the program state.
+ */
+ if (done) {
+ dev_err(mmc_dev(card->host),
+ "Card stuck in wrong state! %s status: %#x\n",
+ __func__, status);
+ return -ETIMEDOUT;
+ }
+
+ /*
+ * Some cards mishandle the status bits,
+ * so make sure to check both the busy
+ * indication and the card state.
+ */
+ } while (!mmc_blk_in_tran_state(status));
+
+ return err;
+}
+
static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
struct mmc_blk_ioc_data *idata)
{
@@ -478,7 +498,6 @@ static int __mmc_blk_ioctl_cmd(struct mm
struct scatterlist sg;
int err;
unsigned int target_part;
- u32 status = 0;
if (!card || !md || !idata)
return -EINVAL;
@@ -612,16 +631,12 @@ static int __mmc_blk_ioctl_cmd(struct mm
memcpy(&(idata->ic.response), cmd.resp, sizeof(cmd.resp));
- if (idata->rpmb) {
+ if (idata->rpmb || (cmd.flags & MMC_RSP_R1B)) {
/*
- * Ensure RPMB command has completed by polling CMD13
+ * Ensure RPMB/R1B command has completed by polling CMD13
* "Send Status".
*/
- err = ioctl_rpmb_card_status_poll(card, &status, 5);
- if (err)
- dev_err(mmc_dev(card->host),
- "%s: Card Status=0x%08X, error %d\n",
- __func__, status, err);
+ err = card_busy_detect(card, MMC_BLK_TIMEOUT_MS, NULL);
}
return err;
@@ -971,58 +986,6 @@ static unsigned int mmc_blk_data_timeout
return ms;
}
-static inline bool mmc_blk_in_tran_state(u32 status)
-{
- /*
- * Some cards mishandle the status bits, so make sure to check both the
- * busy indication and the card state.
- */
- return status & R1_READY_FOR_DATA &&
- (R1_CURRENT_STATE(status) == R1_STATE_TRAN);
-}
-
-static int card_busy_detect(struct mmc_card *card, unsigned int timeout_ms,
- u32 *resp_errs)
-{
- unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms);
- int err = 0;
- u32 status;
-
- do {
- bool done = time_after(jiffies, timeout);
-
- err = __mmc_send_status(card, &status, 5);
- if (err) {
- dev_err(mmc_dev(card->host),
- "error %d requesting status\n", err);
- return err;
- }
-
- /* Accumulate any response error bits seen */
- if (resp_errs)
- *resp_errs |= status;
-
- /*
- * Timeout if the device never becomes ready for data and never
- * leaves the program state.
- */
- if (done) {
- dev_err(mmc_dev(card->host),
- "Card stuck in wrong state! %s status: %#x\n",
- __func__, status);
- return -ETIMEDOUT;
- }
-
- /*
- * Some cards mishandle the status bits,
- * so make sure to check both the busy
- * indication and the card state.
- */
- } while (!mmc_blk_in_tran_state(status));
-
- return err;
-}
-
static int mmc_blk_reset(struct mmc_blk_data *md, struct mmc_host *host,
int type)
{
