[PATCH 5.3 085/180] media: hantro: Fix s_fmt for dynamic resolution changes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx>

commit ae02d49493b5d32bb3e035fdeb1655346f5e1ea5 upstream.

Commit 953aaa1492c53 ("media: rockchip/vpu: Prepare things to support decoders")
changed the conditions under S_FMT was allowed for OUTPUT
CAPTURE buffers.

However, and according to the mem-to-mem stateless decoder specification,
in order to support dynamic resolution changes, S_FMT should be allowed
even if OUTPUT buffers have been allocated.

Relax decoder S_FMT restrictions on OUTPUT buffers, allowing a
resolution modification, provided the pixel format stays the same.

Tested on RK3288 platforms using ChromiumOS Video Decode/Encode
Accelerator Unittests.

[hverkuil: fix typo: In other -> In order]

Fixes: 953aaa1492c53 ("media: rockchip/vpu: Prepare things to support decoders")
Signed-off-by: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx>
Reviewed-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx>      # for v5.4 and up
Signed-off-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/staging/media/hantro/hantro_v4l2.c |   28 +++++++++++++++++++---------
 1 file changed, 19 insertions(+), 9 deletions(-)

--- a/drivers/staging/media/hantro/hantro_v4l2.c
+++ b/drivers/staging/media/hantro/hantro_v4l2.c
@@ -356,20 +356,27 @@ vidioc_s_fmt_out_mplane(struct file *fil
 {
 	struct v4l2_pix_format_mplane *pix_mp = &f->fmt.pix_mp;
 	struct hantro_ctx *ctx = fh_to_ctx(priv);
+	struct vb2_queue *vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
 	const struct hantro_fmt *formats;
 	unsigned int num_fmts;
-	struct vb2_queue *vq;
 	int ret;
 
-	/* Change not allowed if queue is busy. */
-	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
-	if (vb2_is_busy(vq))
-		return -EBUSY;
+	ret = vidioc_try_fmt_out_mplane(file, priv, f);
+	if (ret)
+		return ret;
 
 	if (!hantro_is_encoder_ctx(ctx)) {
 		struct vb2_queue *peer_vq;
 
 		/*
+		 * In order to support dynamic resolution change,
+		 * the decoder admits a resolution change, as long
+		 * as the pixelformat remains. Can't be done if streaming.
+		 */
+		if (vb2_is_streaming(vq) || (vb2_is_busy(vq) &&
+		    pix_mp->pixelformat != ctx->src_fmt.pixelformat))
+			return -EBUSY;
+		/*
 		 * Since format change on the OUTPUT queue will reset
 		 * the CAPTURE queue, we can't allow doing so
 		 * when the CAPTURE queue has buffers allocated.
@@ -378,12 +385,15 @@ vidioc_s_fmt_out_mplane(struct file *fil
 					  V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE);
 		if (vb2_is_busy(peer_vq))
 			return -EBUSY;
+	} else {
+		/*
+		 * The encoder doesn't admit a format change if
+		 * there are OUTPUT buffers allocated.
+		 */
+		if (vb2_is_busy(vq))
+			return -EBUSY;
 	}
 
-	ret = vidioc_try_fmt_out_mplane(file, priv, f);
-	if (ret)
-		return ret;
-
 	formats = hantro_get_formats(ctx, &num_fmts);
 	ctx->vpu_src_fmt = hantro_find_format(formats, num_fmts,
 					      pix_mp->pixelformat);





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux