From: James Smart <jsmart2021@xxxxxxxxx>
[ Upstream commit 76558b25733140a0c6bd53ea8af04b2811c92ec3 ]
Driver missed classifying the chip type for G7 when reporting supported
topologies. This resulted in loop being shown as supported on FC links that
are not supported per the standard.
Add the chip classifications to the topology checks in the driver.
Signed-off-by: Dick Kennedy <dick.kennedy@xxxxxxxxxxxx>
Signed-off-by: James Smart <jsmart2021@xxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/scsi/lpfc/lpfc_attr.c | 5 +++--
drivers/scsi/lpfc/lpfc_mbox.c | 6 +++---
2 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 1e9002138d31c..fe084d47ed9e5 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -3849,8 +3849,9 @@ lpfc_topology_store(struct device *dev, struct device_attribute *attr,
val);
return -EINVAL;
}
- if (phba->pcidev->device == PCI_DEVICE_ID_LANCER_G6_FC &&
- val == 4) {
+ if ((phba->pcidev->device == PCI_DEVICE_ID_LANCER_G6_FC ||
+ phba->pcidev->device == PCI_DEVICE_ID_LANCER_G7_FC) &&
+ val == 4) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
"3114 Loop mode not supported\n");
return -EINVAL;
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index deb094fdbb793..e6bf5e8bc7670 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -513,9 +513,9 @@ lpfc_init_link(struct lpfc_hba * phba,
break;
}
- if (phba->pcidev->device == PCI_DEVICE_ID_LANCER_G6_FC &&
- mb->un.varInitLnk.link_flags & FLAGS_TOPOLOGY_MODE_LOOP) {
- /* Failover is not tried for Lancer G6 */
+ if ((phba->pcidev->device == PCI_DEVICE_ID_LANCER_G6_FC ||
+ phba->pcidev->device == PCI_DEVICE_ID_LANCER_G7_FC) &&
+ mb->un.varInitLnk.link_flags & FLAGS_TOPOLOGY_MODE_LOOP) {
mb->un.varInitLnk.link_flags = FLAGS_TOPOLOGY_MODE_PT_PT;
phba->cfg_topology = FLAGS_TOPOLOGY_MODE_PT_PT;
}
--
2.20.1
