[PATCH AUTOSEL 4.19 48/79] ext4: fix a bug in ext4_wait_for_tail_page_commit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: yangerkun <yangerkun@xxxxxxxxxx>

[ Upstream commit 565333a1554d704789e74205989305c811fd9c7a ]

No need to wait for any commit once the page is fully truncated.
Besides, it may confuse e.g. concurrent ext4_writepage() with the page
still be dirty (will be cleared by truncate_pagecache() in
ext4_setattr()) but buffers has been freed; and then trigger a bug
show as below:

[   26.057508] ------------[ cut here ]------------
[   26.058531] kernel BUG at fs/ext4/inode.c:2134!
...
[   26.088130] Call trace:
[   26.088695]  ext4_writepage+0x914/0xb28
[   26.089541]  writeout.isra.4+0x1b4/0x2b8
[   26.090409]  move_to_new_page+0x3b0/0x568
[   26.091338]  __unmap_and_move+0x648/0x988
[   26.092241]  unmap_and_move+0x48c/0xbb8
[   26.093096]  migrate_pages+0x220/0xb28
[   26.093945]  kernel_mbind+0x828/0xa18
[   26.094791]  __arm64_sys_mbind+0xc8/0x138
[   26.095716]  el0_svc_common+0x190/0x490
[   26.096571]  el0_svc_handler+0x60/0xd0
[   26.097423]  el0_svc+0x8/0xc

Run the procedure (generate by syzkaller) parallel with ext3.

void main()
{
	int fd, fd1, ret;
	void *addr;
	size_t length = 4096;
	int flags;
	off_t offset = 0;
	char *str = "12345";

	fd = open("a", O_RDWR | O_CREAT);
	assert(fd >= 0);

	/* Truncate to 4k */
	ret = ftruncate(fd, length);
	assert(ret == 0);

	/* Journal data mode */
	flags = 0xc00f;
	ret = ioctl(fd, _IOW('f', 2, long), &flags);
	assert(ret == 0);

	/* Truncate to 0 */
	fd1 = open("a", O_TRUNC | O_NOATIME);
	assert(fd1 >= 0);

	addr = mmap(NULL, length, PROT_WRITE | PROT_READ,
					MAP_SHARED, fd, offset);
	assert(addr != (void *)-1);

	memcpy(addr, str, 5);
	mbind(addr, length, 0, 0, 0, MPOL_MF_MOVE);
}

And the bug will be triggered once we seen the below order.

reproduce1                         reproduce2

...                            |   ...
truncate to 4k                 |
change to journal data mode    |
                               |   memcpy(set page dirty)
truncate to 0:                 |
ext4_setattr:                  |
...                            |
ext4_wait_for_tail_page_commit |
                               |   mbind(trigger bug)
truncate_pagecache(clean dirty)|   ...
...                            |

mbind will call ext4_writepage() since the page still be dirty, and then
report the bug since the buffers has been free. Fix it by return
directly once offset equals to 0 which means the page has been fully
truncated.

Reported-by: Hulk Robot <hulkci@xxxxxxxxxx>
Signed-off-by: yangerkun <yangerkun@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20190919063508.1045-1-yangerkun@xxxxxxxxxx
Reviewed-by: Jan Kara <jack@xxxxxxx>
Signed-off-by: Theodore Ts'o <tytso@xxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 fs/ext4/inode.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 8eaf7a581be65..915c070cb20b5 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -5462,11 +5462,15 @@ static void ext4_wait_for_tail_page_commit(struct inode *inode)
 
 	offset = inode->i_size & (PAGE_SIZE - 1);
 	/*
-	 * All buffers in the last page remain valid? Then there's nothing to
-	 * do. We do the check mainly to optimize the common PAGE_SIZE ==
-	 * blocksize case
+	 * If the page is fully truncated, we don't need to wait for any commit
+	 * (and we even should not as __ext4_journalled_invalidatepage() may
+	 * strip all buffers from the page but keep the page dirty which can then
+	 * confuse e.g. concurrent ext4_writepage() seeing dirty page without
+	 * buffers). Also we don't need to wait for any commit if all buffers in
+	 * the page remain valid. This is most beneficial for the common case of
+	 * blocksize == PAGESIZE.
 	 */
-	if (offset > PAGE_SIZE - i_blocksize(inode))
+	if (!offset || offset > (PAGE_SIZE - i_blocksize(inode)))
 		return;
 	while (1) {
 		page = find_lock_page(inode->i_mapping,
-- 
2.20.1




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux