From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
[ Upstream commit 1463b371aff0682c70141f7521db13cc4bbf3016 ]
The driver stores crop rectangle settings supposed to be in line with
hardware state in a device private structure. Since the driver initial
submission, crop rectangle width and height settings are not updated
correctly when rectangle offset settings are applied on hardware. If
an error occurs while the device is updated, the stored settings my no
longer reflect hardware state and consecutive calls to .get_selection()
as well as .get/set_fmt() may return incorrect information. That in
turn may affect ability of a bridge device to use correct DMA transfer
settings if such incorrect informamtion on active frame format returned
by .get/set_fmt() is used.
Assuming a failed update of the device means its actual settings haven't
changed, update crop rectangle width and height settings stored in the
device private structure correctly while the rectangle offset is
successfully applied on hardware so the stored values always reflect
actual hardware state to the extent possible.
Fixes: 2f6e2404799a ("[media] SoC Camera: add driver for OV6650 sensor")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/media/i2c/ov6650.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/media/i2c/ov6650.c b/drivers/media/i2c/ov6650.c
index 5426fed2574ec..43c3f1b6e19ac 100644
--- a/drivers/media/i2c/ov6650.c
+++ b/drivers/media/i2c/ov6650.c
@@ -481,6 +481,7 @@ static int ov6650_set_selection(struct v4l2_subdev *sd,
ret = ov6650_reg_write(client, REG_HSTRT, sel->r.left >> 1);
if (!ret) {
+ priv->rect.width += priv->rect.left - sel->r.left;
priv->rect.left = sel->r.left;
ret = ov6650_reg_write(client, REG_HSTOP,
(sel->r.left + sel->r.width) >> 1);
@@ -490,6 +491,7 @@ static int ov6650_set_selection(struct v4l2_subdev *sd,
ret = ov6650_reg_write(client, REG_VSTRT, sel->r.top >> 1);
}
if (!ret) {
+ priv->rect.height += priv->rect.top - sel->r.top;
priv->rect.top = sel->r.top;
ret = ov6650_reg_write(client, REG_VSTOP,
(sel->r.top + sel->r.height) >> 1);
--
2.20.1
