From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx> commit 8632944841d41a36d77dd1fa88d4201b5291100f upstream. WDD value must be always set to max (0xFFF) otherwise the hardware block will reset the board on the first ping of the watchdog. Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx> Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx> Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> Signed-off-by: Wim Van Sebroeck <wim@xxxxxxxxxxxxxxxxxx> Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/watchdog/sama5d4_wdt.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) --- a/drivers/watchdog/sama5d4_wdt.c +++ b/drivers/watchdog/sama5d4_wdt.c @@ -111,9 +111,7 @@ static int sama5d4_wdt_set_timeout(struc u32 value = WDT_SEC2TICKS(timeout); wdt->mr &= ~AT91_WDT_WDV; - wdt->mr &= ~AT91_WDT_WDD; wdt->mr |= AT91_WDT_SET_WDV(value); - wdt->mr |= AT91_WDT_SET_WDD(value); /* * WDDIS has to be 0 when updating WDD/WDV. The datasheet states: When @@ -251,7 +249,7 @@ static int sama5d4_wdt_probe(struct plat timeout = WDT_SEC2TICKS(wdd->timeout); - wdt->mr |= AT91_WDT_SET_WDD(timeout); + wdt->mr |= AT91_WDT_SET_WDD(WDT_SEC2TICKS(MAX_WDT_TIMEOUT)); wdt->mr |= AT91_WDT_SET_WDV(timeout); ret = sama5d4_wdt_init(wdt);