From: Max Uvarov <muvarov@xxxxxxxxx> commit 1a97a477e666cbdededab93bd3754e508f0c09d7 upstream. After reset SGMII Autoneg timer is set to 2us (bits 6 and 5 are 01). That is not enough to finalize autonegatiation on some devices. Increase this timer duration to maximum supported 16ms. Signed-off-by: Max Uvarov <muvarov@xxxxxxxxx> Cc: Heiner Kallweit <hkallweit1@xxxxxxxxx> Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx> Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx> [ adapted for kernels without phy_modify_mmd ] Signed-off-by: Adrian Bunk <bunk@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/net/phy/dp83867.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -33,6 +33,12 @@ /* Extended Registers */ #define DP83867_CFG4 0x0031 +#define DP83867_CFG4_SGMII_ANEG_MASK (BIT(5) | BIT(6)) +#define DP83867_CFG4_SGMII_ANEG_TIMER_11MS (3 << 5) +#define DP83867_CFG4_SGMII_ANEG_TIMER_800US (2 << 5) +#define DP83867_CFG4_SGMII_ANEG_TIMER_2US (1 << 5) +#define DP83867_CFG4_SGMII_ANEG_TIMER_16MS (0 << 5) + #define DP83867_RGMIICTL 0x0032 #define DP83867_STRAP_STS1 0x006E #define DP83867_RGMIIDCTL 0x0086 @@ -311,6 +317,18 @@ static int dp83867_config_init(struct ph if (ret) return ret; + + /* After reset SGMII Autoneg timer is set to 2us (bits 6 and 5 + * are 01). That is not enough to finalize autoneg on some + * devices. Increase this timer duration to maximum 16ms. + */ + val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4); + val &= ~DP83867_CFG4_SGMII_ANEG_MASK; + val |= DP83867_CFG4_SGMII_ANEG_TIMER_16MS; + ret = phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4, val); + + if (ret) + return ret; } /* Enable Interrupt output INT_OE in CFG3 register */
