From: Pavel Löbl <pavel@xxxxxxxx>
commit e696d00e65e81d46e911f24b12e441037bf11b38 upstream.
Add USB ID for MOXA UPort 2210. This device contains mos7820 but
it passes GPIO0 check implemented by driver and it's detected as
mos7840. Hence product id check is added to force mos7820 mode.
Signed-off-by: Pavel Löbl <pavel@xxxxxxxx>
Cc: stable <stable@xxxxxxxxxxxxxxx>
[ johan: rename id defines and add vendor-id check ]
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/serial/mos7840.c | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -118,11 +118,15 @@
/* This driver also supports
* ATEN UC2324 device using Moschip MCS7840
* ATEN UC2322 device using Moschip MCS7820
+ * MOXA UPort 2210 device using Moschip MCS7820
*/
#define USB_VENDOR_ID_ATENINTL 0x0557
#define ATENINTL_DEVICE_ID_UC2324 0x2011
#define ATENINTL_DEVICE_ID_UC2322 0x7820
+#define USB_VENDOR_ID_MOXA 0x110a
+#define MOXA_DEVICE_ID_2210 0x2210
+
/* Interrupt Routine Defines */
#define SERIAL_IIR_RLS 0x06
@@ -193,6 +197,7 @@ static const struct usb_device_id id_tab
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)},
{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
+ {USB_DEVICE(USB_VENDOR_ID_MOXA, MOXA_DEVICE_ID_2210)},
{} /* terminating entry */
};
MODULE_DEVICE_TABLE(usb, id_table);
@@ -2053,6 +2058,7 @@ static int mos7840_probe(struct usb_seri
const struct usb_device_id *id)
{
u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
+ u16 vid = le16_to_cpu(serial->dev->descriptor.idVendor);
u8 *buf;
int device_type;
@@ -2062,6 +2068,11 @@ static int mos7840_probe(struct usb_seri
goto out;
}
+ if (vid == USB_VENDOR_ID_MOXA && product == MOXA_DEVICE_ID_2210) {
+ device_type = MOSCHIP_DEVICE_ID_7820;
+ goto out;
+ }
+
buf = kzalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
if (!buf)
return -ENOMEM;
