Normally the END_TRANSFER command completion handler will clear the DWC3_EP_TRANSFER_STARTED flag. However, if the command was sent without interrupt on completion, then the flag will not be cleared. Make sure to clear the flag in this case. Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Thinh Nguyen <thinhn@xxxxxxxxxxxx> --- drivers/usb/dwc3/gadget.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 7f97856e6b20..95a0b2e7ecea 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2716,6 +2716,9 @@ static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, WARN_ON_ONCE(ret); dep->resource_index = 0; + if (!interrupt) + dep->flags &= ~DWC3_EP_TRANSFER_STARTED; + if (dwc3_is_usb31(dwc) || dwc->revision < DWC3_REVISION_310A) udelay(100); } -- 2.11.0
