This is a note to let you know that I've just added the patch titled
ARM: orion: provide C-style interrupt handler for MULTI_IRQ_HANDLER
to the 3.13-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm-orion-provide-c-style-interrupt-handler-for-multi_irq_handler.patch
and it can be found in the queue-3.13 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From f28d7de6bd4d41774744e011141945affa127da4 Mon Sep 17 00:00:00 2001
From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Date: Thu, 16 Jan 2014 09:10:31 +0100
Subject: ARM: orion: provide C-style interrupt handler for MULTI_IRQ_HANDLER
From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
commit f28d7de6bd4d41774744e011141945affa127da4 upstream.
DT-enabled Marvell Kirkwood and Dove SoCs make use of an irqchip
driver. As expected for irqchip drivers, it uses a C-style
interrupt handler and therefore selects MULTI_IRQ_HANDLER.
Now, compiling a kernel with both non-DT and DT support enabled,
selecting MULTI_IRQ_HANDLER will break ASM irq handler used by
non-DT boards.
Therefore, we provide a C-style irq handler even for non-DT boards,
if MULTI_IRQ_HANDLER is set. By installing the C-style irq handler
in orion_irq_init this is transparent to all non-DT board files.
While the regression report was filed on Marvell Kirkwood, also
Marvell Dove non-DT boards are affected and fixed by this patch.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Tested-by: Ian Campbell <ijc@xxxxxxxxxxxxxx>
Reported-by: Ian Campbell <ijc@xxxxxxxxxxxxxx>
Fixes: 2326f04321a9 ("ARM: kirkwood: convert to DT irqchip and clocksource")
Fixes: f07d73e33d0e ("ARM: dove: convert to DT irqchip and clocksource")
Acked-by: Andrew Lunn <andrew@xxxxxxx>
Signed-off-by: Jason Cooper <jason@xxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
arch/arm/plat-orion/irq.c | 47 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 47 insertions(+)
--- a/arch/arm/plat-orion/irq.c
+++ b/arch/arm/plat-orion/irq.c
@@ -15,8 +15,51 @@
#include <linux/io.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
+#include <asm/exception.h>
#include <plat/irq.h>
#include <plat/orion-gpio.h>
+#include <mach/bridge-regs.h>
+
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+/*
+ * Compiling with both non-DT and DT support enabled, will
+ * break asm irq handler used by non-DT boards. Therefore,
+ * we provide a C-style irq handler even for non-DT boards,
+ * if MULTI_IRQ_HANDLER is set.
+ *
+ * Notes:
+ * - this is prepared for Kirkwood and Dove only, update
+ * accordingly if you add Orion5x or MV78x00.
+ * - Orion5x uses different macro names and has only one
+ * set of CAUSE/MASK registers.
+ * - MV78x00 uses the same macro names but has a third
+ * set of CAUSE/MASK registers.
+ *
+ */
+
+static void __iomem *orion_irq_base = IRQ_VIRT_BASE;
+
+asmlinkage void
+__exception_irq_entry orion_legacy_handle_irq(struct pt_regs *regs)
+{
+ u32 stat;
+
+ stat = readl_relaxed(orion_irq_base + IRQ_CAUSE_LOW_OFF);
+ stat &= readl_relaxed(orion_irq_base + IRQ_MASK_LOW_OFF);
+ if (stat) {
+ unsigned int hwirq = __fls(stat);
+ handle_IRQ(hwirq, regs);
+ return;
+ }
+ stat = readl_relaxed(orion_irq_base + IRQ_CAUSE_HIGH_OFF);
+ stat &= readl_relaxed(orion_irq_base + IRQ_MASK_HIGH_OFF);
+ if (stat) {
+ unsigned int hwirq = 32 + __fls(stat);
+ handle_IRQ(hwirq, regs);
+ return;
+ }
+}
+#endif
void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr)
{
@@ -35,6 +78,10 @@ void __init orion_irq_init(unsigned int
ct->chip.irq_unmask = irq_gc_mask_set_bit;
irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_MASK_CACHE,
IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE);
+
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+ set_handle_irq(orion_legacy_handle_irq);
+#endif
}
#ifdef CONFIG_OF
Patches currently in stable-queue which might be from sebastian.hesselbarth@xxxxxxxxx are
queue-3.13/arm-orion-provide-c-style-interrupt-handler-for-multi_irq_handler.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html