From: Chung-Hsien Hsu <stanley.hsu@xxxxxxxxxxx>
[ Upstream commit fbf07000960d9c8a13fdc17c6de0230d681c7543 ]
The driver sends an action frame down and waits for a completion signal
triggered by the received BRCMF_E_ACTION_FRAME_OFF_CHAN_COMPLETE event
to continue the process. However, the action frame could be transmitted
either on the current channel or on an off channel. For the on-channel
case, only BRCMF_E_ACTION_FRAME_COMPLETE event will be received when
the frame is transmitted, which make the driver always wait a full
timeout duration. This patch has the completion signal be triggered by
receiving the BRCMF_E_ACTION_FRAME_COMPLETE event for the on-channel
case.
This change fixes WFA p2p certification 5.1.19 failure.
Signed-off-by: Chung-Hsien Hsu <stanley.hsu@xxxxxxxxxxx>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@xxxxxxxxxxx>
Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
.../wireless/broadcom/brcm80211/brcmfmac/p2p.c | 17 +++++++++++++++--
.../wireless/broadcom/brcm80211/brcmfmac/p2p.h | 2 ++
2 files changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
index c9566c9036721..4a883f4bbf885 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
@@ -1462,10 +1462,12 @@ int brcmf_p2p_notify_action_tx_complete(struct brcmf_if *ifp,
return 0;
if (e->event_code == BRCMF_E_ACTION_FRAME_COMPLETE) {
- if (e->status == BRCMF_E_STATUS_SUCCESS)
+ if (e->status == BRCMF_E_STATUS_SUCCESS) {
set_bit(BRCMF_P2P_STATUS_ACTION_TX_COMPLETED,
&p2p->status);
- else {
+ if (!p2p->wait_for_offchan_complete)
+ complete(&p2p->send_af_done);
+ } else {
set_bit(BRCMF_P2P_STATUS_ACTION_TX_NOACK, &p2p->status);
/* If there is no ack, we don't need to wait for
* WLC_E_ACTION_FRAME_OFFCHAN_COMPLETE event
@@ -1516,6 +1518,17 @@ static s32 brcmf_p2p_tx_action_frame(struct brcmf_p2p_info *p2p,
p2p->af_sent_channel = le32_to_cpu(af_params->channel);
p2p->af_tx_sent_jiffies = jiffies;
+ if (test_bit(BRCMF_P2P_STATUS_DISCOVER_LISTEN, &p2p->status) &&
+ p2p->af_sent_channel ==
+ ieee80211_frequency_to_channel(p2p->remain_on_channel.center_freq))
+ p2p->wait_for_offchan_complete = false;
+ else
+ p2p->wait_for_offchan_complete = true;
+
+ brcmf_dbg(TRACE, "Waiting for %s tx completion event\n",
+ (p2p->wait_for_offchan_complete) ?
+ "off-channel" : "on-channel");
+
timeout = wait_for_completion_timeout(&p2p->send_af_done,
P2P_AF_MAX_WAIT_TIME);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h
index 0e8b34d2d85cb..39f0d02180882 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h
@@ -124,6 +124,7 @@ struct afx_hdl {
* @gon_req_action: about to send go negotiation requets frame.
* @block_gon_req_tx: drop tx go negotiation requets frame.
* @p2pdev_dynamically: is p2p device if created by module param or supplicant.
+ * @wait_for_offchan_complete: wait for off-channel tx completion event.
*/
struct brcmf_p2p_info {
struct brcmf_cfg80211_info *cfg;
@@ -144,6 +145,7 @@ struct brcmf_p2p_info {
bool gon_req_action;
bool block_gon_req_tx;
bool p2pdev_dynamically;
+ bool wait_for_offchan_complete;
};
s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg, bool p2pdev_forced);
--
2.20.1
