From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
[ Upstream commit 4722a3e6b716d9d4594c3cf3856b03bbd24a59a8 ]
This commit fixes some build issues.
The first issue is the breakage of linux.bin.ub target since commit
ece97f3a5fb5 ("microblaze: Fix simpleImage format generation")
because the addition of UIMAGE_{IN,OUT} affected it.
make ARCH=microblaze CROSS_COMPILE=microblaze-linux- linux.bin.ub
[ snip ]
OBJCOPY arch/microblaze/boot/linux.bin
UIMAGE arch/microblaze/boot/linux.bin.ub.ub
/usr/bin/mkimage: Can't open arch/microblaze/boot/linux.bin.ub: No such file or directory
make[1]: *** [arch/microblaze/boot/Makefile;14: arch/microblaze/boot/linux.bin.ub] Error 1
make: *** [arch/microblaze/Makefile;83: linux.bin.ub] Error 2
The second issue is the use of the "if_changed" multiple times for
the same target.
As commit 92a4728608a8 ("x86/boot: Fix if_changed build flip/flop bug")
pointed out, this never works properly. Moreover, generating multiple
images as a side-effect is confusing.
Let's split the build recipe for each image.
simpleImage.<dt>*.unstrip is just a copy of vmlinux.
simpleImage.<dt> and simpleImage.<dt>.ub are created in the same way
as linux.bin and linux.bin.ub, respectively.
I kept simpleImage.* recipes independent of linux.bin.* ones to not
change the behavior.
Lastly, this commit fixes "make ARCH=microblaze clean". Previously,
it only cleaned up the unstrip image. Now, all the simpleImage files
are cleaned.
Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/microblaze/Makefile | 2 +-
arch/microblaze/boot/Makefile | 19 +++++++++----------
2 files changed, 10 insertions(+), 11 deletions(-)
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index b9808ddaf985f..548bac6c60f8c 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -86,7 +86,7 @@ linux.bin linux.bin.gz linux.bin.ub: vmlinux
@echo 'Kernel: $(boot)/$@ is ready' ' (#'`cat .version`')'
simpleImage.%: vmlinux
- $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+ $(Q)$(MAKE) $(build)=$(boot) $(addprefix $(boot)/$@., ub unstrip strip)
@echo 'Kernel: $(boot)/$@ is ready' ' (#'`cat .version`')'
define archhelp
diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile
index 96eefdca0d9b3..cff570a719461 100644
--- a/arch/microblaze/boot/Makefile
+++ b/arch/microblaze/boot/Makefile
@@ -3,7 +3,7 @@
# arch/microblaze/boot/Makefile
#
-targets := linux.bin linux.bin.gz linux.bin.ub simpleImage.%
+targets := linux.bin linux.bin.gz linux.bin.ub simpleImage.*
OBJCOPYFLAGS := -R .note -R .comment -R .note.gnu.build-id -O binary
@@ -16,21 +16,20 @@ $(obj)/linux.bin.ub: $(obj)/linux.bin FORCE
$(obj)/linux.bin.gz: $(obj)/linux.bin FORCE
$(call if_changed,gzip)
-quiet_cmd_cp = CP $< $@$2
- cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)
-
quiet_cmd_strip = STRIP $< $@$2
cmd_strip = $(STRIP) -K microblaze_start -K _end -K __log_buf \
-K _fdt_start $< -o $@$2
UIMAGE_LOADADDR = $(CONFIG_KERNEL_BASE_ADDR)
-UIMAGE_IN = $@
-UIMAGE_OUT = $@.ub
-$(obj)/simpleImage.%: vmlinux FORCE
- $(call if_changed,cp,.unstrip)
+$(obj)/simpleImage.$(DTB): vmlinux FORCE
$(call if_changed,objcopy)
+
+$(obj)/simpleImage.$(DTB).ub: $(obj)/simpleImage.$(DTB) FORCE
$(call if_changed,uimage)
- $(call if_changed,strip,.strip)
-clean-files += simpleImage.*.unstrip linux.bin.ub
+$(obj)/simpleImage.$(DTB).unstrip: vmlinux FORCE
+ $(call if_changed,shipped)
+
+$(obj)/simpleImage.$(DTB).strip: vmlinux FORCE
+ $(call if_changed,strip)
--
2.20.1
