FAILED: patch "[PATCH] selinux: process labeled IPsec TCP SYN-ACK packets properly" failed to apply to 3.13-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch below does not apply to the 3.13-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

>From 5c6c26813a209e7075baf908e3ad81c1a9d389e8 Mon Sep 17 00:00:00 2001
From: Paul Moore <pmoore@xxxxxxxxxx>
Date: Mon, 9 Dec 2013 16:11:53 -0500
Subject: [PATCH] selinux: process labeled IPsec TCP SYN-ACK packets properly
 in selinux_ip_postroute()

Due to difficulty in arriving at the proper security label for
TCP SYN-ACK packets in selinux_ip_postroute(), we need to check packets
while/before they are undergoing XFRM transforms instead of waiting
until afterwards so that we can determine the correct security label.

Reported-by: Janak Desai <Janak.Desai@xxxxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Paul Moore <pmoore@xxxxxxxxxx>

diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 95cb1345257d..a98228e7b91d 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -4846,22 +4846,31 @@ static unsigned int selinux_ip_postroute(struct sk_buff *skb, int ifindex,
 	 * as fast and as clean as possible. */
 	if (!selinux_policycap_netpeer)
 		return selinux_ip_postroute_compat(skb, ifindex, family);
+
+	secmark_active = selinux_secmark_enabled();
+	peerlbl_active = selinux_peerlbl_enabled();
+	if (!secmark_active && !peerlbl_active)
+		return NF_ACCEPT;
+
+	sk = skb->sk;
+
 #ifdef CONFIG_XFRM
 	/* If skb->dst->xfrm is non-NULL then the packet is undergoing an IPsec
 	 * packet transformation so allow the packet to pass without any checks
 	 * since we'll have another chance to perform access control checks
 	 * when the packet is on it's final way out.
 	 * NOTE: there appear to be some IPv6 multicast cases where skb->dst
-	 *       is NULL, in this case go ahead and apply access control. */
-	if (skb_dst(skb) != NULL && skb_dst(skb)->xfrm != NULL)
+	 *       is NULL, in this case go ahead and apply access control.
+	 * NOTE: if this is a local socket (skb->sk != NULL) that is in the
+	 *       TCP listening state we cannot wait until the XFRM processing
+	 *       is done as we will miss out on the SA label if we do;
+	 *       unfortunately, this means more work, but it is only once per
+	 *       connection. */
+	if (skb_dst(skb) != NULL && skb_dst(skb)->xfrm != NULL &&
+	    !(sk != NULL && sk->sk_state == TCP_LISTEN))
 		return NF_ACCEPT;
 #endif
-	secmark_active = selinux_secmark_enabled();
-	peerlbl_active = selinux_peerlbl_enabled();
-	if (!secmark_active && !peerlbl_active)
-		return NF_ACCEPT;
 
-	sk = skb->sk;
 	if (sk == NULL) {
 		/* Without an associated socket the packet is either coming
 		 * from the kernel or it is being forwarded; check the packet
@@ -4889,6 +4898,25 @@ static unsigned int selinux_ip_postroute(struct sk_buff *skb, int ifindex,
 		struct sk_security_struct *sksec = sk->sk_security;
 		if (selinux_skb_peerlbl_sid(skb, family, &skb_sid))
 			return NF_DROP;
+		/* At this point, if the returned skb peerlbl is SECSID_NULL
+		 * and the packet has been through at least one XFRM
+		 * transformation then we must be dealing with the "final"
+		 * form of labeled IPsec packet; since we've already applied
+		 * all of our access controls on this packet we can safely
+		 * pass the packet. */
+		if (skb_sid == SECSID_NULL) {
+			switch (family) {
+			case PF_INET:
+				if (IPCB(skb)->flags & IPSKB_XFRM_TRANSFORMED)
+					return NF_ACCEPT;
+				break;
+			case PF_INET6:
+				if (IP6CB(skb)->flags & IP6SKB_XFRM_TRANSFORMED)
+					return NF_ACCEPT;
+			default:
+				return NF_DROP_ERR(-ECONNREFUSED);
+			}
+		}
 		if (selinux_conn_sid(sksec->sid, skb_sid, &peer_sid))
 			return NF_DROP;
 		secmark_perm = PACKET__SEND;

--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]