[PATCH 4.14 172/239] net: phy: mdio-bcm-unimac: Allow configuring MDIO clock divider

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Florian Fainelli <f.fainelli@xxxxxxxxx>

[ Upstream commit b78ac6ecd1b6b46f8767cbafa95a7b0b51b87ad8 ]

Allow the configuration of the MDIO clock divider when the Device Tree
contains 'clock-frequency' property (similar to I2C and SPI buses).
Because the hardware may have lost its state during suspend/resume,
re-apply the MDIO clock divider upon resumption.

Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 .../bindings/net/brcm,unimac-mdio.txt         |  3 +
 drivers/net/phy/mdio-bcm-unimac.c             | 83 ++++++++++++++++++-
 2 files changed, 84 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt
index 4648948f7c3b8..e15589f477876 100644
--- a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt
+++ b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt
@@ -19,6 +19,9 @@ Optional properties:
 - interrupt-names: must be "mdio_done_error" when there is a share interrupt fed
   to this hardware block, or must be "mdio_done" for the first interrupt and
   "mdio_error" for the second when there are separate interrupts
+- clocks: A reference to the clock supplying the MDIO bus controller
+- clock-frequency: the MDIO bus clock that must be output by the MDIO bus
+  hardware, if absent, the default hardware values are used
 
 Child nodes of this MDIO bus controller node are standard Ethernet PHY device
 nodes as described in Documentation/devicetree/bindings/net/phy.txt
diff --git a/drivers/net/phy/mdio-bcm-unimac.c b/drivers/net/phy/mdio-bcm-unimac.c
index 08e0647b85e23..f9d98a6e67bc4 100644
--- a/drivers/net/phy/mdio-bcm-unimac.c
+++ b/drivers/net/phy/mdio-bcm-unimac.c
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <linux/clk.h>
 
 #include <linux/of.h>
 #include <linux/of_platform.h>
@@ -45,6 +46,8 @@ struct unimac_mdio_priv {
 	void __iomem		*base;
 	int (*wait_func)	(void *wait_func_data);
 	void			*wait_func_data;
+	struct clk		*clk;
+	u32			clk_freq;
 };
 
 static inline u32 unimac_mdio_readl(struct unimac_mdio_priv *priv, u32 offset)
@@ -189,6 +192,35 @@ static int unimac_mdio_reset(struct mii_bus *bus)
 	return 0;
 }
 
+static void unimac_mdio_clk_set(struct unimac_mdio_priv *priv)
+{
+	unsigned long rate;
+	u32 reg, div;
+
+	/* Keep the hardware default values */
+	if (!priv->clk_freq)
+		return;
+
+	if (!priv->clk)
+		rate = 250000000;
+	else
+		rate = clk_get_rate(priv->clk);
+
+	div = (rate / (2 * priv->clk_freq)) - 1;
+	if (div & ~MDIO_CLK_DIV_MASK) {
+		pr_warn("Incorrect MDIO clock frequency, ignoring\n");
+		return;
+	}
+
+	/* The MDIO clock is the reference clock (typicaly 250Mhz) divided by
+	 * 2 x (MDIO_CLK_DIV + 1)
+	 */
+	reg = unimac_mdio_readl(priv, MDIO_CFG);
+	reg &= ~(MDIO_CLK_DIV_MASK << MDIO_CLK_DIV_SHIFT);
+	reg |= div << MDIO_CLK_DIV_SHIFT;
+	unimac_mdio_writel(priv, reg, MDIO_CFG);
+}
+
 static int unimac_mdio_probe(struct platform_device *pdev)
 {
 	struct unimac_mdio_pdata *pdata = pdev->dev.platform_data;
@@ -215,9 +247,26 @@ static int unimac_mdio_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	priv->clk = devm_clk_get(&pdev->dev, NULL);
+	if (PTR_ERR(priv->clk) == -EPROBE_DEFER)
+		return PTR_ERR(priv->clk);
+	else
+		priv->clk = NULL;
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
+
+	if (of_property_read_u32(np, "clock-frequency", &priv->clk_freq))
+		priv->clk_freq = 0;
+
+	unimac_mdio_clk_set(priv);
+
 	priv->mii_bus = mdiobus_alloc();
-	if (!priv->mii_bus)
-		return -ENOMEM;
+	if (!priv->mii_bus) {
+		ret = -ENOMEM;
+		goto out_clk_disable;
+	}
 
 	bus = priv->mii_bus;
 	bus->priv = priv;
@@ -251,6 +300,8 @@ static int unimac_mdio_probe(struct platform_device *pdev)
 
 out_mdio_free:
 	mdiobus_free(bus);
+out_clk_disable:
+	clk_disable_unprepare(priv->clk);
 	return ret;
 }
 
@@ -260,10 +311,37 @@ static int unimac_mdio_remove(struct platform_device *pdev)
 
 	mdiobus_unregister(priv->mii_bus);
 	mdiobus_free(priv->mii_bus);
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static int unimac_mdio_suspend(struct device *d)
+{
+	struct unimac_mdio_priv *priv = dev_get_drvdata(d);
+
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static int unimac_mdio_resume(struct device *d)
+{
+	struct unimac_mdio_priv *priv = dev_get_drvdata(d);
+	int ret;
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
+
+	unimac_mdio_clk_set(priv);
 
 	return 0;
 }
 
+static SIMPLE_DEV_PM_OPS(unimac_mdio_pm_ops,
+			 unimac_mdio_suspend, unimac_mdio_resume);
+
 static const struct of_device_id unimac_mdio_ids[] = {
 	{ .compatible = "brcm,genet-mdio-v5", },
 	{ .compatible = "brcm,genet-mdio-v4", },
@@ -279,6 +357,7 @@ static struct platform_driver unimac_mdio_driver = {
 	.driver = {
 		.name = UNIMAC_MDIO_DRV_NAME,
 		.of_match_table = unimac_mdio_ids,
+		.pm = &unimac_mdio_pm_ops,
 	},
 	.probe	= unimac_mdio_probe,
 	.remove	= unimac_mdio_remove,
-- 
2.20.1






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux