[PATCH AUTOSEL 4.4 19/48] ata: ep93xx: Use proper enums for directions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Nathan Chancellor <natechancellor@xxxxxxxxx>

[ Upstream commit 6adde4a36f1b6a562a1057fbb1065007851050e7 ]

Clang warns when one enumerated type is implicitly converted to another.

drivers/ata/pata_ep93xx.c:662:36: warning: implicit conversion from
enumeration type 'enum dma_data_direction' to different enumeration type
'enum dma_transfer_direction' [-Wenum-conversion]
        drv_data->dma_rx_data.direction = DMA_FROM_DEVICE;
                                        ~ ^~~~~~~~~~~~~~~
drivers/ata/pata_ep93xx.c:670:36: warning: implicit conversion from
enumeration type 'enum dma_data_direction' to different enumeration type
'enum dma_transfer_direction' [-Wenum-conversion]
        drv_data->dma_tx_data.direction = DMA_TO_DEVICE;
                                        ~ ^~~~~~~~~~~~~
drivers/ata/pata_ep93xx.c:681:19: warning: implicit conversion from
enumeration type 'enum dma_data_direction' to different enumeration type
'enum dma_transfer_direction' [-Wenum-conversion]
        conf.direction = DMA_FROM_DEVICE;
                       ~ ^~~~~~~~~~~~~~~
drivers/ata/pata_ep93xx.c:692:19: warning: implicit conversion from
enumeration type 'enum dma_data_direction' to different enumeration type
'enum dma_transfer_direction' [-Wenum-conversion]
        conf.direction = DMA_TO_DEVICE;
                       ~ ^~~~~~~~~~~~~

Use the equivalent valued enums from the expected type so that Clang no
longer warns about a conversion.

DMA_TO_DEVICE = DMA_MEM_TO_DEV = 1
DMA_FROM_DEVICE = DMA_DEV_TO_MEM = 2

Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
Signed-off-by: Nathan Chancellor <natechancellor@xxxxxxxxx>
Signed-off-by: Jens Axboe <axboe@xxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/ata/pata_ep93xx.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/ata/pata_ep93xx.c b/drivers/ata/pata_ep93xx.c
index bd6b089c67a3a..634c814cbeda4 100644
--- a/drivers/ata/pata_ep93xx.c
+++ b/drivers/ata/pata_ep93xx.c
@@ -659,7 +659,7 @@ static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data)
 	 * start of new transfer.
 	 */
 	drv_data->dma_rx_data.port = EP93XX_DMA_IDE;
-	drv_data->dma_rx_data.direction = DMA_FROM_DEVICE;
+	drv_data->dma_rx_data.direction = DMA_DEV_TO_MEM;
 	drv_data->dma_rx_data.name = "ep93xx-pata-rx";
 	drv_data->dma_rx_channel = dma_request_channel(mask,
 		ep93xx_pata_dma_filter, &drv_data->dma_rx_data);
@@ -667,7 +667,7 @@ static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data)
 		return;
 
 	drv_data->dma_tx_data.port = EP93XX_DMA_IDE;
-	drv_data->dma_tx_data.direction = DMA_TO_DEVICE;
+	drv_data->dma_tx_data.direction = DMA_MEM_TO_DEV;
 	drv_data->dma_tx_data.name = "ep93xx-pata-tx";
 	drv_data->dma_tx_channel = dma_request_channel(mask,
 		ep93xx_pata_dma_filter, &drv_data->dma_tx_data);
@@ -678,7 +678,7 @@ static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data)
 
 	/* Configure receive channel direction and source address */
 	memset(&conf, 0, sizeof(conf));
-	conf.direction = DMA_FROM_DEVICE;
+	conf.direction = DMA_DEV_TO_MEM;
 	conf.src_addr = drv_data->udma_in_phys;
 	conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 	if (dmaengine_slave_config(drv_data->dma_rx_channel, &conf)) {
@@ -689,7 +689,7 @@ static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data)
 
 	/* Configure transmit channel direction and destination address */
 	memset(&conf, 0, sizeof(conf));
-	conf.direction = DMA_TO_DEVICE;
+	conf.direction = DMA_MEM_TO_DEV;
 	conf.dst_addr = drv_data->udma_out_phys;
 	conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 	if (dmaengine_slave_config(drv_data->dma_tx_channel, &conf)) {
-- 
2.20.1




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux