Re: [PATCH] KVM: PPC: Book3S HV: XIVE: Free previous EQ page when setting up a new one

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/11/2019 10:49, Greg Kurz wrote:
> The EQ page is allocated by the guest and then passed to the hypervisor
> with the H_INT_SET_QUEUE_CONFIG hcall. A reference is taken on the page
> before handing it over to the HW. This reference is dropped either when
> the guest issues the H_INT_RESET hcall or when the KVM device is released.
> But, the guest can legitimately call H_INT_SET_QUEUE_CONFIG several times
> to reset the EQ (vCPU hot unplug) or set a new EQ (guest reboot). In both
> cases the EQ page reference is leaked. This is especially visible when
> the guest memory is backed with huge pages: start a VM up to the guest
> userspace, either reboot it or unplug a vCPU, quit QEMU. The leak is
> observed by comparing the value of HugePages_Free in /proc/meminfo before
> and after the VM is run.
> 
> Note that the EQ reset path seems to be calling put_page() but this is
> done after xive_native_configure_queue() which clears the qpage field
> in the XIVE queue structure, ie. the put_page() block is a nop and the
> previous page pointer was just overwritten anyway. In the other case of
> configuring a new EQ page, nothing seems to be done to release the old
> one.

Yes. Nice catch. I think we should try to fix the problem differently. 

The routine xive_native_configure_queue() is only suited for XIVE 
drivers doing their own EQ page allocation: Linux PowerNV and the 
KVM XICS-over-XIVE device. The KVM XIVE device acts as a proxy for 
the guest OS doing the allocation and it has different needs.

Having a specific xive_native_configure_queue() for the KVM XIVE 
device seems overkill. May be, we could introduce a helper routine 
in KVM XIVE device calling xive_native_configure_queue() and handling 
the page reference how it should be ? That is to drop the previous
page reference in case of a change on q->qpage.


Also, we should try to preserve the previous setting until the whole 
configuration is in place. That seems possible up to the call to 
xive_native_configure_queue(). If kvmppc_xive_attach_escalation()
fails I think it is too late, as the HW has been configured by 
xive_native_configure_queue(), and we should just cleanup everything. 

Thanks,

C. 


> Fix both cases by always calling put_page() on the existing EQ page in
> kvmppc_xive_native_set_queue_config(). This is a seemless change for the
> EQ reset case. However this causes xive_native_configure_queue() to be
> called twice for the new EQ page case: one time to reset the EQ and another
> time to configure the new page. This is needed because we cannot release
> the EQ page before calling xive_native_configure_queue() since it may still
> be used by the HW. We cannot modify xive_native_configure_queue() to drop
> the reference either because this function is also used by the XICS-on-XIVE
> device which requires free_pages() instead of put_page(). This isn't a big
> deal anyway since H_INT_SET_QUEUE_CONFIG isn't a hot path.
> 
> Reported-by: Satheesh Rajendran <sathnaga@xxxxxxxxxxxxxxxxxx>
> Cc: stable@xxxxxxxxxxxxxxx # v5.2
> Fixes: 13ce3297c576 ("KVM: PPC: Book3S HV: XIVE: Add controls for the EQ configuration")
> Signed-off-by: Greg Kurz <groug@xxxxxxxx>
> ---
>  arch/powerpc/kvm/book3s_xive_native.c |   21 ++++++++++++---------
>  1 file changed, 12 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/powerpc/kvm/book3s_xive_native.c b/arch/powerpc/kvm/book3s_xive_native.c
> index 34bd123fa024..8ab908d23dc2 100644
> --- a/arch/powerpc/kvm/book3s_xive_native.c
> +++ b/arch/powerpc/kvm/book3s_xive_native.c
> @@ -570,10 +570,12 @@ static int kvmppc_xive_native_set_queue_config(struct kvmppc_xive *xive,
>  		 __func__, server, priority, kvm_eq.flags,
>  		 kvm_eq.qshift, kvm_eq.qaddr, kvm_eq.qtoggle, kvm_eq.qindex);
>  
> -	/* reset queue and disable queueing */
> -	if (!kvm_eq.qshift) {
> -		q->guest_qaddr  = 0;
> -		q->guest_qshift = 0;
> +	/*
> +	 * Reset queue and disable queueing. It will be re-enabled
> +	 * later on if the guest is configuring a new EQ page.
> +	 */
> +	if (q->guest_qshift) {
> +		page = virt_to_page(q->qpage);
>  
>  		rc = xive_native_configure_queue(xc->vp_id, q, priority,
>  						 NULL, 0, true);
> @@ -583,12 +585,13 @@ static int kvmppc_xive_native_set_queue_config(struct kvmppc_xive *xive,
>  			return rc;
>  		}
>  
> -		if (q->qpage) {
> -			put_page(virt_to_page(q->qpage));
> -			q->qpage = NULL;
> -		}
> +		put_page(page);
>  
> -		return 0;
> +		if (!kvm_eq.qshift) {
> +			q->guest_qaddr  = 0;
> +			q->guest_qshift = 0;
> +			return 0;
> +		}
>  	}
>  
>  	/*
> 




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux