From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
[ Upstream commit 45ddc1b24806cc8f1a09f23dd4e7b6e4a8ae36e1 ]
When NCR5380_abort() returns FAILED, the driver forgets that the target is
still busy. Hence, further commands may be sent to the target, which may fail
during selection and produce the error message, "reselection after won
arbitration?". Prevent this by leaving the busy flag set when NCR5380_abort()
fails.
Tested-by: Michael Schmitz <schmitzmic@xxxxxxxxx>
Signed-off-by: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/scsi/NCR5380.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index a290ec632248e..b13290b3e5d38 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -522,8 +522,6 @@ static void complete_cmd(struct Scsi_Host *instance,
hostdata->sensing = NULL;
}
- hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
-
cmd->scsi_done(cmd);
}
@@ -1711,6 +1709,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
cmd->result = DID_ERROR << 16;
complete_cmd(instance, cmd);
hostdata->connected = NULL;
+ hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
return;
#endif
case PHASE_DATAIN:
@@ -1793,6 +1792,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
cmd, scmd_id(cmd), cmd->device->lun);
hostdata->connected = NULL;
+ hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
cmd->result &= ~0xffff;
cmd->result |= cmd->SCp.Status;
@@ -1952,6 +1952,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
NCR5380_transfer_pio(instance, &phase, &len, &data);
if (msgout == ABORT) {
hostdata->connected = NULL;
+ hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
cmd->result = DID_ERROR << 16;
complete_cmd(instance, cmd);
maybe_release_dma_irq(instance);
@@ -2106,13 +2107,16 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
dsprintk(NDEBUG_RESELECTION | NDEBUG_QUEUES, instance,
"reselect: removed %p from disconnected queue\n", tmp);
} else {
+ int target = ffs(target_mask) - 1;
+
shost_printk(KERN_ERR, instance, "target bitmask 0x%02x lun %d not in disconnected queue.\n",
target_mask, lun);
/*
* Since we have an established nexus that we can't do anything
* with, we must abort it.
*/
- do_abort(instance);
+ if (do_abort(instance) == 0)
+ hostdata->busy[target] &= ~(1 << lun);
return;
}
@@ -2283,8 +2287,10 @@ static int NCR5380_abort(struct scsi_cmnd *cmd)
out:
if (result == FAILED)
dsprintk(NDEBUG_ABORT, instance, "abort: failed to abort %p\n", cmd);
- else
+ else {
+ hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
dsprintk(NDEBUG_ABORT, instance, "abort: successfully aborted %p\n", cmd);
+ }
queue_work(hostdata->work_q, &hostdata->main_task);
maybe_release_dma_irq(instance);
--
2.20.1
