From: Rob Herring <robh@xxxxxxxxxx>
[ Upstream commit 2f967f9e9fa076affb711da1a8389b5d33814fc6 ]
SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm/boot/dts/ste-dbx5x0.dtsi | 4 ++--
arch/arm/boot/dts/ste-hrefprev60.dtsi | 2 +-
arch/arm/boot/dts/ste-snowball.dts | 2 +-
arch/arm/boot/dts/ste-u300.dts | 2 +-
4 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 86bd320057a38..b2b23ceb6d557 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -894,7 +894,7 @@
power-domains = <&pm_domains DOMAIN_VAPE>;
};
- ssp@80002000 {
+ spi@80002000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80002000 0x1000>;
interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -908,7 +908,7 @@
power-domains = <&pm_domains DOMAIN_VAPE>;
};
- ssp@80003000 {
+ spi@80003000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80003000 0x1000>;
interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index b0278f4c486ce..55a6a1ac03370 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -57,7 +57,7 @@
};
};
- ssp@80002000 {
+ spi@80002000 {
/*
* On the first generation boards, this SSP/SPI port was connected
* to the AB8500.
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index e80e421638836..bb1b64d6ab5e8 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -311,7 +311,7 @@
pinctrl-1 = <&i2c3_sleep_mode>;
};
- ssp@80002000 {
+ spi@80002000 {
pinctrl-names = "default";
pinctrl-0 = <&ssp0_snowball_mode>;
};
diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts
index 82a661677e97e..fb6ca7f864176 100644
--- a/arch/arm/boot/dts/ste-u300.dts
+++ b/arch/arm/boot/dts/ste-u300.dts
@@ -451,7 +451,7 @@
dma-names = "rx";
};
- spi: ssp@c0006000 {
+ spi: spi@c0006000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0xc0006000 0x1000>;
interrupt-parent = <&vica>;
--
2.20.1
