From: Soeren Moch <smoch@xxxxxx> [ Upstream commit 0990c5e7573098117c69651821647c228483e31b ] The RockPro64 schematic [1] page 18 states a min voltage of 0.8V and a max voltage of 1.4V for the VDD_LOG pwm regulator. However, there is an additional note that the pwm parameter needs to be modified. >From the schematics a voltage range of 0.8V to 1.7V can be calculated. Additional voltage measurements on the board show that this fix indeed leads to the correct voltage, while without this fix the voltage was set too high. [1] http://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf Fixes: e4f3fb490967 ("arm64: dts: rockchip: add initial dts support for Rockpro64") Signed-off-by: Soeren Moch <smoch@xxxxxx> Link: https://lore.kernel.org/r/20191003215036.15023-1-smoch@xxxxxx Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts index 5818b85255123..cad314f708300 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts @@ -166,7 +166,7 @@ regulator-always-on; regulator-boot-on; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; + regulator-max-microvolt = <1700000>; vin-supply = <&vcc5v0_sys>; }; }; -- 2.20.1
