From: Joakim Zhang <qiangqing.zhang@xxxxxxx> The ECC (memory error detection and correction) mechanism can be activated or not, controlled by the ECCDIS bit in CAN_MECR. When disabled, updates on indications and reporting registers are stopped. So if want to disable ECC completely, had better assert ECCDIS bit, not just mask the related interrupts. Fixes: cdce844865be ("can: flexcan: add vf610 support for FlexCAN") Signed-off-by: Joakim Zhang <qiangqing.zhang@xxxxxxx> Cc: linux-stable <stable@xxxxxxxxxxxxxxx> Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> --- drivers/net/can/flexcan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index dc5695dffc2e..1cd5179cb876 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -1188,6 +1188,7 @@ static int flexcan_chip_start(struct net_device *dev) reg_mecr = priv->read(®s->mecr); reg_mecr &= ~FLEXCAN_MECR_ECRWRDIS; priv->write(reg_mecr, ®s->mecr); + reg_mecr |= FLEXCAN_MECR_ECCDIS; reg_mecr &= ~(FLEXCAN_MECR_NCEFAFRZ | FLEXCAN_MECR_HANCEI_MSK | FLEXCAN_MECR_FANCEI_MSK); priv->write(reg_mecr, ®s->mecr); -- 2.24.0.rc1