From: Johan Hovold <johan@xxxxxxxxxx> commit 84968291d7924261c6a0624b9a72f952398e258b upstream. Add missing endianness conversion when setting the line speed so that this driver might work also on big-endian machines. Also use an unsigned format specifier in the corresponding debug message. Signed-off-by: Johan Hovold <johan@xxxxxxxxxx> Cc: stable <stable@xxxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20191029102354.2733-3-johan@xxxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/usb/serial/whiteheat.c | 9 ++++++--- drivers/usb/serial/whiteheat.h | 2 +- 2 files changed, 7 insertions(+), 4 deletions(-) --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -681,6 +681,7 @@ static void firm_setup_port(struct tty_s struct device *dev = &port->dev; struct whiteheat_port_settings port_settings; unsigned int cflag = tty->termios.c_cflag; + speed_t baud; port_settings.port = port->port_number + 1; @@ -741,11 +742,13 @@ static void firm_setup_port(struct tty_s dev_dbg(dev, "%s - XON = %2x, XOFF = %2x\n", __func__, port_settings.xon, port_settings.xoff); /* get the baud rate wanted */ - port_settings.baud = tty_get_baud_rate(tty); - dev_dbg(dev, "%s - baud rate = %d\n", __func__, port_settings.baud); + baud = tty_get_baud_rate(tty); + port_settings.baud = cpu_to_le32(baud); + dev_dbg(dev, "%s - baud rate = %u\n", __func__, baud); /* fixme: should set validated settings */ - tty_encode_baud_rate(tty, port_settings.baud, port_settings.baud); + tty_encode_baud_rate(tty, baud, baud); + /* handle any settings that aren't specified in the tty structure */ port_settings.lloop = 0; --- a/drivers/usb/serial/whiteheat.h +++ b/drivers/usb/serial/whiteheat.h @@ -91,7 +91,7 @@ struct whiteheat_simple { struct whiteheat_port_settings { __u8 port; /* port number (1 to N) */ - __u32 baud; /* any value 7 - 460800, firmware calculates + __le32 baud; /* any value 7 - 460800, firmware calculates best fit; arrives little endian */ __u8 bits; /* 5, 6, 7, or 8 */ __u8 stop; /* 1 or 2, default 1 (2 = 1.5 if bits = 5) */
