From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
commit 9a976949613132977098fc49510b46fa8678d864 upstream.
Commit 747668dbc061 ("usb-storage: Set virt_boundary_mask to avoid SG
overflows") attempted to solve a problem involving scatter-gather I/O
and USB/IP by setting the virt_boundary_mask for mass-storage devices.
However, it now turns out that this interacts badly with commit
09324d32d2a0 ("block: force an unlimited segment size on queues with a
virt boundary"), which was added later. A typical error message is:
ehci-pci 0000:00:13.2: swiotlb buffer is full (sz: 327680 bytes),
total 32768 (slots), used 97 (slots)
There is no longer any reason to keep the virt_boundary_mask setting
for usb-storage. It was needed in the first place only for handling
devices with a block size smaller than the maxpacket size and where
the host controller was not capable of fully general scatter-gather
operation (that is, able to merge two SG segments into a single USB
packet). But:
High-speed or slower connections never use a bulk maxpacket
value larger than 512;
The SCSI layer does not handle block devices with a block size
smaller than 512 bytes;
All the host controllers capable of SuperSpeed operation can
handle fully general SG;
Since commit ea44d190764b ("usbip: Implement SG support to
vhci-hcd and stub driver") was merged, the USB/IP driver can
also handle SG.
Therefore all supported device/controller combinations should be okay
with no need for any special virt_boundary_mask. So in order to fix
the swiotlb problem, this patch reverts commit 747668dbc061.
Reported-and-tested-by: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
Link: https://marc.info/?l=linux-usb&m=157134199501202&w=2
Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
CC: Seth Bollinger <Seth.Bollinger@xxxxxxxx>
CC: <stable@xxxxxxxxxxxxxxx>
Fixes: 747668dbc061 ("usb-storage: Set virt_boundary_mask to avoid SG overflows")
Acked-by: Christoph Hellwig <hch@xxxxxx>
Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910211145520.1673-100000@xxxxxxxxxxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/storage/scsiglue.c | 10 ----------
1 file changed, 10 deletions(-)
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -65,7 +65,6 @@ static const char* host_info(struct Scsi
static int slave_alloc (struct scsi_device *sdev)
{
struct us_data *us = host_to_us(sdev->host);
- int maxp;
/*
* Set the INQUIRY transfer length to 36. We don't use any of
@@ -75,15 +74,6 @@ static int slave_alloc (struct scsi_devi
sdev->inquiry_len = 36;
/*
- * USB has unusual scatter-gather requirements: the length of each
- * scatterlist element except the last must be divisible by the
- * Bulk maxpacket value. Fortunately this value is always a
- * power of 2. Inform the block layer about this requirement.
- */
- maxp = usb_maxpacket(us->pusb_dev, us->recv_bulk_pipe, 0);
- blk_queue_virt_boundary(sdev->request_queue, maxp - 1);
-
- /*
* Some host controllers may have alignment requirements.
* We'll play it safe by requiring 512-byte alignment always.
*/
