[PATCH 4.19] spi: spi-gpio: fix crash when num-chipselects is 0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Commit 249e2632dcd0509b8f8f296f5aabf4d48dfd6da8 upstream.

If an spi-gpio was specified with num-chipselects = <0> in dts, kernel will crash:

Unable to handle kernel paging request at virtual address 32697073
pgd = (ptrval)
[32697073] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.19.72 #0
Hardware name: Generic DT based system
PC is at validate_desc+0x28/0x80
LR is at gpiod_direction_output+0x14/0x128
...
[<c0544db4>] (validate_desc) from [<c0545228>] (gpiod_direction_output+0x14/0x128)
[<c0545228>] (gpiod_direction_output) from [<c05fa714>] (spi_gpio_setup+0x58/0x64)
[<c05fa714>] (spi_gpio_setup) from [<c05f7258>] (spi_setup+0x12c/0x148)
[<c05f7258>] (spi_setup) from [<c05f7330>] (spi_add_device+0xbc/0x12c)
[<c05f7330>] (spi_add_device) from [<c05f7f74>] (spi_register_controller+0x838/0x924)
[<c05f7f74>] (spi_register_controller) from [<c05fa494>] (spi_bitbang_start+0x108/0x120)
[<c05fa494>] (spi_bitbang_start) from [<c05faa34>] (spi_gpio_probe+0x314/0x338)
[<c05faa34>] (spi_gpio_probe) from [<c05a844c>] (platform_drv_probe+0x34/0x70)

The cause is spi_gpio_setup() did not check if the spi-gpio has chipselect pins
before setting their direction and results in derefing an invalid pointer.

The bug is spotted in kernel 4.19.72 on OpenWrt, and does not occur in 4.14.

Fixes: 9b00bc7b901ff ("spi: spi-gpio: Rewrite to use GPIO descriptors")

Signed-off-by: DENG Qingfang <dqfext@xxxxxxxxx>
---
 drivers/spi/spi-gpio.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c
index 77838d8fd..3b7f0d077 100644
--- a/drivers/spi/spi-gpio.c
+++ b/drivers/spi/spi-gpio.c
@@ -242,10 +242,12 @@ static int spi_gpio_setup(struct spi_device *spi)
 	 * The CS GPIOs have already been
 	 * initialized from the descriptor lookup.
 	 */
-	cs = spi_gpio->cs_gpios[spi->chip_select];
-	if (!spi->controller_state && cs)
-		status = gpiod_direction_output(cs,
-						!(spi->mode & SPI_CS_HIGH));
+	if (spi_gpio->has_cs) {
+		cs = spi_gpio->cs_gpios[spi->chip_select];
+		if (!spi->controller_state && cs)
+			status = gpiod_direction_output(cs,
+						  !(spi->mode & SPI_CS_HIGH));
+	}
 
 	if (!status)
 		status = spi_bitbang_setup(spi);
-- 
2.23.0




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux