From: Yizhuo <yzhai003@xxxxxxx> [ Upstream commit 1252b283141f03c3dffd139292c862cae10e174d ] In function pfuze100_regulator_probe(), variable "val" could be initialized if regmap_read() fails. However, "val" is used to decide the control flow later in the if statement, which is potentially unsafe. Signed-off-by: Yizhuo <yzhai003@xxxxxxx> Link: https://lore.kernel.org/r/20190929170957.14775-1-yzhai003@xxxxxxx Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/regulator/pfuze100-regulator.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index c68556bf6f399..ec185502dcebd 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -609,7 +609,13 @@ static int pfuze100_regulator_probe(struct i2c_client *client, /* SW2~SW4 high bit check and modify the voltage value table */ if (i >= sw_check_start && i <= sw_check_end) { - regmap_read(pfuze_chip->regmap, desc->vsel_reg, &val); + ret = regmap_read(pfuze_chip->regmap, + desc->vsel_reg, &val); + if (ret) { + dev_err(&client->dev, "Fails to read from the register.\n"); + return ret; + } + if (val & sw_hi) { if (pfuze_chip->chip_id == PFUZE3000) { desc->volt_table = pfuze3000_sw2hi; -- 2.20.1
