From: Florian Fainelli <f.fainelli@xxxxxxxxx>
[ Upstream commit 92696286f3bb37ba50e4bd8d1beb24afb759a799 ]
phydev->dev_flags is entirely dependent on the PHY device driver which
is going to be used, setting the internal GENET PHY revision in those
bits only makes sense when drivers/net/phy/bcm7xxx.c is the PHY driver
being used.
Fixes: 487320c54143 ("net: bcmgenet: communicate integrated PHY revision to PHY driver")
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Acked-by: Doug Berger <opendmb@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/ethernet/broadcom/genet/bcmmii.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -346,11 +346,12 @@ int bcmgenet_mii_probe(struct net_device
struct bcmgenet_priv *priv = netdev_priv(dev);
struct device_node *dn = priv->pdev->dev.of_node;
struct phy_device *phydev;
- u32 phy_flags;
+ u32 phy_flags = 0;
int ret;
/* Communicate the integrated PHY revision */
- phy_flags = priv->gphy_rev;
+ if (priv->internal_phy)
+ phy_flags = priv->gphy_rev;
/* Initialize link state variables that bcmgenet_mii_setup() uses */
priv->old_link = -1;
